O-grid or Polar-grid for airfoil mesh

fippo_dk · March 30, 2011, 03:43

Hi,

I want to simulate the flow around an airfoil, and I want to mesh the domain in an o-grid (or polar grid), in order to conveniently simulate the flow for different angles of attack.

My problem is mostly at the trailing edge, where I get the cells very skewed.

I want to mesh the trailing edge like in the screenshot.

Does anyone have ideas/suggestions on how to implement such mesh with blockMesh/gmsh or any other open source mesh generator?

Cheers

image002.jpg

image006.jpg

image008.jpg

linnemann · March 31, 2011, 06:57

Hello

Certainly doable using Salome.

With a bit of clever thinking you can make a python script that takes XFoil profiles and makes a macro for Salome.

The end result will look something like the following.

fippo_dk · March 31, 2011, 07:30

Could you post a screenshot of the far domain? is it a circular or square domain?

What about the trailing edge? is it blunt or sharp?

Mvh

Felipe

linnemann · March 31, 2011, 07:32

Hi its a circular domain and the trailing edge is blunt.

March 30, 2011, 03:43	O-grid or Polar-grid for airfoil mesh	#1
fippo_dk New Member Felipe Join Date: Apr 2010 Posts: 13 Rep Power: 16	Hi, I want to simulate the flow around an airfoil, and I want to mesh the domain in an o-grid (or polar grid), in order to conveniently simulate the flow for different angles of attack. My problem is mostly at the trailing edge, where I get the cells very skewed. I want to mesh the trailing edge like in the screenshot. Does anyone have ideas/suggestions on how to implement such mesh with blockMesh/gmsh or any other open source mesh generator? Cheers image002.jpg image006.jpg image008.jpg Last edited by fippo_dk; March 30, 2011 at 04:08.

March 31, 2011, 07:32		#4
linnemann Senior Member Niels Nielsen Join Date: Mar 2009 Location: NJ - Denmark Posts: 555 Rep Power: 27	Hi its a circular domain and the trailing edge is blunt. __________________ Linnemann PS. I do not do personal support, so please post in the forums.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gambit problems	Althea	FLUENT	22	January 4, 2017 03:19
[ICEM] surface mesh merging problem	everest	ANSYS Meshing & Geometry	44	April 14, 2016 06:41
[ICEM] Hexa mesh, curve mesh setup, bunching law	Anorky	ANSYS Meshing & Geometry	4	November 12, 2014 00:27
[snappyHexMesh] external flow with snappyHexMesh	chelvistero	OpenFOAM Meshing & Mesh Conversion	11	January 15, 2010 19:43
unstructured vs. structured grids	Frank Muldoon	Main CFD Forum	1	January 5, 1999 10:09

March 31, 2011, 07:30		#3
fippo_dk New Member Felipe Join Date: Apr 2010 Posts: 13 Rep Power: 16	Could you post a screenshot of the far domain? is it a circular or square domain? What about the trailing edge? is it blunt or sharp? Mvh Felipe