|
[Sponsors] |
April 28, 2011, 06:24 |
problem with Min/max rho
|
#1 |
Senior Member
Join Date: Mar 2011
Posts: 158
Rep Power: 15 |
Hi,
I have problems of an increasing density. Even after the third time step (deltat=1) Min/max rho = 0,38 / 2,82. The fluid is air. So I would expect something around 0,6 I think the boundary conditions are set wrong. But I have made a setup identic to an other case where the density doesn't increase. Does someone have a clue which boundary conditions are prone to increase density? Best Regards, tH3f0rC3 |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
conduction problem | venkataramana | OpenFOAM | 3 | December 1, 2013 07:30 |
UDF compiling problem | Wouter | Fluent UDF and Scheme Programming | 6 | June 6, 2012 04:43 |
Problem Importing Geometry ProE to CFX | fatb0y | CFX | 3 | January 14, 2012 19:42 |
natural convection problem for a CHT problem | Se-Hee | CFX | 2 | June 10, 2007 06:29 |
Adiabatic and Rotating wall (Convection problem) | ParodDav | CFX | 5 | April 29, 2007 19:13 |