|
[Sponsors] |
overshooting of Omega in SST komega using simpleFoam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 26, 2011, 11:54 |
overshooting of Omega in SST komega using simpleFoam
|
#1 |
Member
Jubayer
Join Date: Oct 2009
Location: The University of Western Ontario, London, Ontario
Posts: 42
Blog Entries: 1
Rep Power: 16 |
Hi,
Omega overshoots and it takes too many iterations to converge p. What could be the probable reason for that? I have checked my mesh with checkMesh command and there was no warnings. Also I have run potentialFoam before running simpleFoam. Thanks. ----------------------------------------------------------------------- Starting time loop Time = 1 smoothSolver: Solving for Ux, Initial residual = 0.0539018, Final residual = 5.13197e-05, No Iterations 7 smoothSolver: Solving for Uy, Initial residual = 0.0534879, Final residual = 5.81967e-05, No Iterations 7 smoothSolver: Solving for Uz, Initial residual = 0.354536, Final residual = 6.28499e-05, No Iterations 9 GAMG: Solving for p, Initial residual = 1, Final residual = 8.90323e-05, No Iterations 31 time step continuity errors : sum local = 7.5287e-06, global = 4.65685e-06, cumulative = 4.65685e-06 smoothSolver: Solving for omega, Initial residual = 0.302181, Final residual = 9.99827e-05, No Iterations 768 smoothSolver: Solving for k, Initial residual = 1, Final residual = 8.99188e-05, No Iterations 18 ExecutionTime = 365.58 s ClockTime = 366 s Time = 2 smoothSolver: Solving for Ux, Initial residual = 0.0158573, Final residual = 5.8239e-05, No Iterations 6 smoothSolver: Solving for Uy, Initial residual = 0.0141884, Final residual = 5.95859e-05, No Iterations 6 smoothSolver: Solving for Uz, Initial residual = 0.290663, Final residual = 5.35847e-05, No Iterations 10 GAMG: Solving for p, Initial residual = 0.359203, Final residual = 9.6866e-05, No Iterations 66 time step continuity errors : sum local = 2.05483e-05, global = -1.10031e-05, cumulative = -6.3463e-06 smoothSolver: Solving for omega, Initial residual = 0.304444, Final residual = 9.18995e-05, No Iterations 11 bounding omega, min: -1.2602e+06 max: 1.4044e+06 average: 3530.71 smoothSolver: Solving for k, Initial residual = 0.0768383, Final residual = 7.52255e-05, No Iterations 18 ExecutionTime = 490.8 s ClockTime = 492 s Time = 3 smoothSolver: Solving for Ux, Initial residual = 0.000481439, Final residual = 6.82875e-05, No Iterations 2 smoothSolver: Solving for Uy, Initial residual = 0.00038065, Final residual = 5.65517e-05, No Iterations 2 smoothSolver: Solving for Uz, Initial residual = 0.0443271, Final residual = 5.28052e-05, No Iterations 8 GAMG: Solving for p, Initial residual = 0.329192, Final residual = 9.66057e-05, No Iterations 114 time step continuity errors : sum local = 1.50051e-05, global = 6.06992e-07, cumulative = -5.7393e-06 smoothSolver: Solving for omega, Initial residual = 1, Final residual = 0.294131, No Iterations 1000 bounding omega, min: -1735.72 max: 4.64824e+21 average: 2.64451e+15 smoothSolver: Solving for k, Initial residual = 0.200063, Final residual = 1.76944e-09, No Iterations 1 ExecutionTime = 997.83 s ClockTime = 1000 s ---------------------------------------------------------------------- Regards Jubayer |
|
Tags |
omega, simplefoam, sst komega |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
k-omega SST simulation of turbulent flow around a circular cylinder | DanM | OpenFOAM Running, Solving & CFD | 17 | October 13, 2016 13:29 |
Boundary Conditions for k omega SST | dancfd | OpenFOAM Pre-Processing | 0 | June 9, 2011 23:25 |
k Omega SST SAS for OpenFOAM 1.5??? | barath.ezhilan | OpenFOAM Running, Solving & CFD | 3 | June 2, 2010 07:41 |
Wall function implementation K Omega SSt | cbarry | OpenFOAM | 3 | August 18, 2009 10:09 |
Implementation details of SST k-omega model | Niels | Main CFD Forum | 3 | July 3, 2008 17:45 |