[Gearb0x]

Dear Foamers,

I have set up a case where I impose an initial field the following way.
In the "0" directory, I have the following initial conditions for the alpha.component field file :

/*--------------------------------*- C++ -*----------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  4.1                                   |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
FoamFile
{
    version     2.0;
    format      ascii;
    class       volScalarField;
    location    "0";
    object      alpha.component;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

dimensions      [0 0 0 0 0 0 0];

#include "myFile"
internalField   nonuniform $myFieldName;

[...]

Apparently, the setup is fine since OpenFOAM is running.

However, when opening the case in Paraview (note : I installed paraView separately from OpenFOAM), I receive the following error :

unsupported nonuniform list type myFieldName

Does any one of you know how to get around this error ?

Thanks for the support