[OpenFOAM] ParaFOAM issue with cavity case

mschoenberg · August 11, 2008, 15:07

I've compiled ParaFOAM with icc with no problems, and have data in the cavity case from the icoFOAM solver. Nevertheless, when I invoke paraFoam -case cavity from the appropriate location:

ParaView loads, and tells me "A reader for cavity.OpenFOAM could not be found. Please choose one:".

I scroll to the bottom and select "OpenFOAM Files". It then fails out with this error message:

terminate called after throwing an instance of 'std::length_error'
what(): basic_string::_S_create
/tmp/OpenFOAM/OpenFOAM-1.5/bin/paraFoam: line 83: 11379 Aborted paraview --data=$caseFile

Any ideas?

mschoenberg · August 13, 2008, 11:32

Switching to Takuya Oshima's OF reader solved this.

ehsan · November 21, 2008, 03:07

Hi,

Please read the last message in the forum.

sxhdhi · November 21, 2008, 03:57

Hi

You should first do the installation steps 7.1 and 7.2. For your case, seems step 7.2 is not yet completed.

August 11, 2008, 15:07	ParaFOAM issue with cavity case	#1
mschoenberg New Member Michael Schoenberg Join Date: Mar 2009 Posts: 9 Rep Power: 18	I've compiled ParaFOAM with icc with no problems, and have data in the cavity case from the icoFOAM solver. Nevertheless, when I invoke paraFoam -case cavity from the appropriate location: ParaView loads, and tells me "A reader for cavity.OpenFOAM could not be found. Please choose one:". I scroll to the bottom and select "OpenFOAM Files". It then fails out with this error message: terminate called after throwing an instance of 'std::length_error' what(): basic_string::_S_create /tmp/OpenFOAM/OpenFOAM-1.5/bin/paraFoam: line 83: 11379 Aborted paraview --data=$caseFile Any ideas?

August 13, 2008, 11:32	Switching to Takuya Oshima's O	#2
mschoenberg New Member Michael Schoenberg Join Date: Mar 2009 Posts: 9 Rep Power: 18	Switching to Takuya Oshima's OF reader solved this.

November 21, 2008, 03:07	Hi, Please read the last me	#3
ehsan Senior Member Ehsan Join Date: Mar 2009 Posts: 112 Rep Power: 18	Hi, Please read the last message in the forum.

November 21, 2008, 03:57	Hi You should first do the	#4
sxhdhi Member Su Xiaohui Join Date: Mar 2009 Location: Singapore Posts: 30 Rep Power: 18	Hi You should first do the installation steps 7.1 and 7.2. For your case, seems step 7.2 is not yet completed.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using cavity case to a Poiseuille flow	ashbab	OpenFOAM Pre-Processing	1	June 27, 2015 07:01
pisoFoam cavity case - k & epsilon values	Red Devil	OpenFOAM Running, Solving & CFD	9	November 9, 2013 16:58
[OpenFOAM] Saving ParaFoam views and case	sail	ParaView	9	November 25, 2011 15:46
ParaFoam step 6 test case	michiel09	OpenFOAM Installation	11	July 22, 2009 21:58
[OpenFOAM] ParaFoam cannot open icoFoam/cavity case	Bob	ParaView	1	April 2, 2009 04:34