|
[Sponsors] |
|
March 17, 2006, 13:00 |
Paraview batch mode
|
#1 |
Senior Member
Xiaofeng Liu
Join Date: Mar 2009
Location: State College, PA, USA
Posts: 118
Rep Power: 17 |
Did anyone use paraview batch mode to create animation? My simulation data is huge. When I use GUI mode, it just crashed. So I tried my luck with batch mode. But it ended up with following error message:
ERROR: In ../../../../../paraview-2.2.0/Servers/Common/vtkProcessModule.cxx, line 548 vtkPVProcessModule (0x9ace538): Cannot create object of type "vtkFoamReader". while processing Message 0 = New Argument 0 = string_value {vtkFoamReader} Argument 1 = id_value {89} ERROR: In ../../../../../paraview-2.2.0/Servers/Common/vtkProcessModule.cxx, line 550 vtkPVProcessModule (0x9ace538): Aborting execution for debugging purposes.
__________________
Xiaofeng Liu, Ph.D., P.E., Assistant Professor Department of Civil and Environmental Engineering Penn State University 223B Sackett Building University Park, PA 16802 Web: http://water.engr.psu.edu/liu/ |
|
March 17, 2006, 13:30 |
Not directly answering your qu
|
#2 |
Senior Member
Mattijs Janssens
Join Date: Mar 2009
Posts: 1,419
Rep Power: 26 |
Not directly answering your question but can you do your animation on vtk files (so using foamToVTK)?
(I assume you have deselected the cache/record buttons in the animation panel?) |
|
March 17, 2006, 13:35 |
I didn't try vtk files for ani
|
#3 |
Senior Member
Xiaofeng Liu
Join Date: Mar 2009
Location: State College, PA, USA
Posts: 118
Rep Power: 17 |
I didn't try vtk files for animation (I don't know how to do it honestly). Also my data is so huge that I can't afford to convert every time step to vtk files. That will double the data size.
When I use the GUI to record the animation, paraview complains about not enough memory and then terminated. Maybe that's because I didn't use cache. I will try it.
__________________
Xiaofeng Liu, Ph.D., P.E., Assistant Professor Department of Civil and Environmental Engineering Penn State University 223B Sackett Building University Park, PA 16802 Web: http://water.engr.psu.edu/liu/ |
|
March 17, 2006, 13:50 |
Well, I tried again. I am sure
|
#4 |
Senior Member
Xiaofeng Liu
Join Date: Mar 2009
Location: State College, PA, USA
Posts: 118
Rep Power: 17 |
Well, I tried again. I am sure the cache is one. The problem is still like that. Here is the message of paraview:
new cannot satisfy memory request. This does not necessarily mean you have run out of virtual memory. It could be due to a stack violation caused by e.g. bad use of pointers or an out of date shared library /home/liu19/research/OpenFOAM/OpenFOAM-1.2/bin/paraFoam: line 57: 10034 Aborted paraview paraFoam.pvs Any thought?
__________________
Xiaofeng Liu, Ph.D., P.E., Assistant Professor Department of Civil and Environmental Engineering Penn State University 223B Sackett Building University Park, PA 16802 Web: http://water.engr.psu.edu/liu/ |
|
March 17, 2006, 14:04 |
Nah you're supposed to switch
|
#5 |
Senior Member
Eugene de Villiers
Join Date: Mar 2009
Posts: 725
Rep Power: 21 |
Nah you're supposed to switch the cash OFF, otherwise it keeps everything for each timestep.
|
|
March 17, 2006, 14:29 |
There's a little button on the
|
#6 |
Senior Member
Hrvoje Jasak
Join Date: Mar 2009
Location: London, England
Posts: 1,906
Rep Power: 33 |
There's a little button on the Animation Control panel which say "Record All properties". Switch that off and all will be well.
I have done 500-odd frame animations this way so if the case fits into memory you should not have a problem. Enjoy, Hrv
__________________
Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk |
|
March 17, 2006, 15:14 |
Now it's working fine.
Thank
|
#7 |
Senior Member
Xiaofeng Liu
Join Date: Mar 2009
Location: State College, PA, USA
Posts: 118
Rep Power: 17 |
Now it's working fine.
Thank you, guys.
__________________
Xiaofeng Liu, Ph.D., P.E., Assistant Professor Department of Civil and Environmental Engineering Penn State University 223B Sackett Building University Park, PA 16802 Web: http://water.engr.psu.edu/liu/ |
|
July 20, 2006, 13:17 |
Hi,
I would like to be use t
|
#8 |
New Member
kmurphy
Join Date: Mar 2009
Posts: 10
Rep Power: 17 |
Hi,
I would like to be use the paraview batch mode but I get a similar error to that reported in the original post in this thread. Does anyone know of a solution? Regards, KM |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] icem cfd batch mode | srobin11 | ANSYS Meshing & Geometry | 20 | August 2, 2020 18:40 |
[PyFoam] Problems with the new PyFoam release | zfaraday | OpenFOAM Community Contributions | 13 | December 9, 2014 18:58 |
[PyFoam] having problems with pyfoam Installation | vitorspadetoventurin | OpenFOAM Community Contributions | 3 | December 2, 2014 07:18 |
Batch mode ICEM CFD parametrization problem | sportsfun | ANSYS | 0 | December 19, 2012 14:20 |
Prosurf in batch mode | Dhruv | Siemens | 1 | September 19, 2005 18:02 |