|
[Sponsors] |
extrude-normal problems when creat structured mesh for a ship |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 11, 2013, 22:25 |
extrude-normal problems when creat structured mesh for a ship
|
#1 |
New Member
nigel
Join Date: Nov 2012
Posts: 10
Rep Power: 13 |
Dear all,
Thanks for your attention first! I met the problems of "positive skew jacobian" when I try to extrude the domain grids of half of a ship into blocks. My used one domain grid to describe the ship model with deck, as shown in pic1. pic1: As you can see in the following pic, the grid for stern is very sharp, so when i use extrude--normal method to create the block for the ship, i met the problems such as "positive skew jacobian" . So, my good friends, can your give me some suggest and help me with the problems? Thank you ! |
|
Tags |
extrude, structured mesh |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
[snappyHexMesh] Layers:problem with curvature | giulio.topazio | OpenFOAM Meshing & Mesh Conversion | 10 | August 22, 2012 09:03 |
Convergence moving mesh | lr103476 | OpenFOAM Running, Solving & CFD | 30 | November 19, 2007 14:09 |
Structured Grid Definition | craig shores | Main CFD Forum | 3 | March 21, 2001 14:48 |
unstructured vs. structured grids | Frank Muldoon | Main CFD Forum | 1 | January 5, 1999 10:09 |