|
[Sponsors] |
Boundary Condition for Normal extrusion (C grid) |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 5, 2024, 10:38 |
Boundary Condition for Normal extrusion (C grid)
|
#1 |
New Member
Join Date: Mar 2021
Posts: 13
Rep Power: 5 |
Hello!
I am trying to generate a C-mesh for a NACA 6 series airfoil on Pointwise. So far, I have imported geometry of airfoil and created a horizontal line from the trailing edge to far field. When trying to extrude, I want to set a constant X boundary condition at the far field of the trailing edge wake. However, because the edges for the normal extrusion include selecting the horizontal line twice (one for extruding upwards and one downwards), I can only click the BC prompt once as they are both at the same location. This results in the BC being applied for the upper section of the extrusion only. Does anyone know how to go about this so that it can be applied to both sides? I have attached images of what this looks like. Thanks |
|
Tags |
pointwise |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wind turbine simulation | Saturn | CFX | 60 | July 17, 2024 06:45 |
Time dependant pressure boundary condition | yosuke1984 | OpenFOAM Verification & Validation | 3 | May 6, 2015 07:16 |
several fields modified by single boundary condition | schröder | OpenFOAM Programming & Development | 3 | April 21, 2015 06:09 |
Error finding variable "THERMX" | sunilpatil | CFX | 8 | April 26, 2013 08:00 |
CFX fails to calculate a diffuser pipe flow | shenying0710 | CFX | 7 | March 26, 2013 05:13 |