|
[Sponsors] |
September 2, 2010, 11:54 |
Gridgen Cobalt 3D Export Issue
|
#1 |
New Member
Join Date: Jun 2010
Posts: 9
Rep Power: 15 |
I have used Gridgen's Anisotropic feature for the first time to build an unstructured grid around an aircraft. The total cell count is roughly 15 million.
I set the BC's, and when I try to export the analysis data I get a face allocation error. I realize that Gridgen is limited in memory usage with 32 byte and all. Pointwise suggested I import the grid into Pointwise since it is 64 byte. When I try to do this, it stops and hangs at 78% when reading the .gg file. Anyone have any advice? I'm running on a Dell workstation with 48 Gb of RAM running Vista. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Export mesh to Gridgen | ali987 | ANSYS Meshing & Geometry | 2 | January 2, 2010 12:20 |
OpenFOAM on MinGW crosscompiler hosted on Linux | allenzhao | OpenFOAM Installation | 127 | January 30, 2009 19:08 |
Fluent Export Command Issue .... | Leo Hindarto | FLUENT | 0 | January 3, 2009 23:20 |
Gridgen Export to Fluent5/6 failure due to memory | ND | Pointwise & Gridgen | 2 | September 1, 2007 10:28 |
Gridgen to Tgrid export | Vincent | FLUENT | 1 | July 22, 2006 14:02 |