About Forces

mzzmrt · June 19, 2023, 03:00

Hi Everyone,

It may be my ignorance but I could not understand the 6 dof forces data.

As an example when it is drawn "Fz" from the decay of sphere tutorial, the result is below:

https://ibb.co/VH9rfRz

Why is this single force component (Fz) has three phased look?

Regards,

valgrinda · July 3, 2023, 03:59

Could you upload your setup for us to check?

mzzmrt · July 4, 2023, 03:34

My results from the "9_15 Heave Decay of Sphere" tutorial case as is.

valgrinda · July 7, 2023, 06:22

Still not sure what you mean.

mzzmrt · July 8, 2023, 03:32

Let me try to explain but I am not sure I can.

When I draw the force z vs time got the plot at the link of the first post.

I expect a continuous (or near continuous) dots as represent a single curve, instead when these dots connected there is very large zig-zags on the force curve. Indeed these dots seems like three different curves with a phase difference in appearance, isn't' it?

Is this due the low resolution of the grid or is this the normal behavior?

June 19, 2023, 03:00	About Forces	#1
mzzmrt Senior Member Join Date: Mar 2014 Posts: 112 Rep Power: 12	Hi Everyone, It may be my ignorance but I could not understand the 6 dof forces data. As an example when it is drawn "Fz" from the decay of sphere tutorial, the result is below: https://ibb.co/VH9rfRz Why is this single force component (Fz) has three phased look? Regards,

July 3, 2023, 03:59		#2
valgrinda Super Moderator Hans Bihs Join Date: Jun 2009 Location: Trondheim, Norway Posts: 377 Rep Power: 17	Could you upload your setup for us to check? __________________ Hans Bihs Team REEF3D www.reef3d.com

July 7, 2023, 06:22		#4
valgrinda Super Moderator Hans Bihs Join Date: Jun 2009 Location: Trondheim, Norway Posts: 377 Rep Power: 17	Still not sure what you mean. __________________ Hans Bihs Team REEF3D www.reef3d.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The CoP Does not exist: Validating Aerodynamic forces through a "line of action"	ds4719	Main CFD Forum	14	February 18, 2022 18:05
Convergence problem of OF	WUYing	OpenFOAM Running, Solving & CFD	2	September 20, 2021 10:09
Residuals and forces spiraling out of control before failing	edomalley1	OpenFOAM Running, Solving & CFD	3	September 7, 2018 10:42
Wrong forces coming from forces function object in controlDict	Jason_Duguay	OpenFOAM Post-Processing	0	April 13, 2016 09:07
Forces for airfoil test case	Martin_	OpenFOAM Running, Solving & CFD	1	July 2, 2012 11:58

July 4, 2023, 03:34		#3
mzzmrt Senior Member Join Date: Mar 2014 Posts: 112 Rep Power: 12	My results from the "9_15 Heave Decay of Sphere" tutorial case as is.

July 8, 2023, 03:32		#5
mzzmrt Senior Member Join Date: Mar 2014 Posts: 112 Rep Power: 12	Let me try to explain but I am not sure I can. When I draw the force z vs time got the plot at the link of the first post. I expect a continuous (or near continuous) dots as represent a single curve, instead when these dots connected there is very large zig-zags on the force curve. Indeed these dots seems like three different curves with a phase difference in appearance, isn't' it? Is this due the low resolution of the grid or is this the normal behavior?