|
[Sponsors] |
Mistake in time vector of "REEF3D_6DOF_forces_0.dat" |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 20, 2023, 16:56 |
Mistake in time vector of "REEF3D_6DOF_forces_0.dat"
|
#1 |
New Member
Pablo Antonio Matamala Carvajal
Join Date: Sep 2022
Location: Valdivia, Chile
Posts: 21
Rep Power: 4 |
Hi Team REEF3D
I'm currently simulating Heave Decay tests for the study of mesh convergency. Aparently everything is working OK except for the "REEF3D_6DOF_forces_0.dat" file, where the column wich indicate the time show diferences with the imput comands (I made 10 seconds of simulations, and in the file shows almost 20). This occur only in this file, due to in "REEF3D_6DOF_position_0.dat" and "REEF3D_6DOF_velocity_0.dat" the time column is OK. This happened in the 3 simulation that I ran with diferent meshes. It is only the column of time with the mistake? Can I work with the force results, or they are also wrong? I attach one of the sample of the ctr.txt and control.txt files. Thank you very much, kind regards Pablo |
|
December 20, 2023, 17:26 |
|
#2 |
New Member
Pablo Antonio Matamala Carvajal
Join Date: Sep 2022
Location: Valdivia, Chile
Posts: 21
Rep Power: 4 |
There is the "REEF3D_6DOF_position_0.dat" and the "REEF3D_6DOF_velocity_0.dat" files, and a image of the results in "REEF3D_6DOF_forces_0.dat" (I could not atach this one due to it exceeds the limit of 195.3 KB).
Thank you very much Pablo |
|
Tags |
decay test, floating body, force |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
bash script for pseudo-parallel usage of reconstructPar | kwardle | OpenFOAM Post-Processing | 42 | May 8, 2024 00:17 |
[solidMechanics] Support thread for "Solid Mechanics Solvers added to OpenFOAM Extend" | bigphil | OpenFOAM CC Toolkits for Fluid-Structure Interaction | 686 | December 22, 2022 10:10 |
Stuck in a Rut- interDyMFoam! | xoitx | OpenFOAM Running, Solving & CFD | 14 | March 25, 2016 08:09 |
Floating point exception error | lpz_michele | OpenFOAM Running, Solving & CFD | 53 | October 19, 2015 03:50 |
mixerVesselAMI2D's mass is not balancing | sharonyue | OpenFOAM Running, Solving & CFD | 6 | June 10, 2013 10:34 |