|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Yupeng Duan
Join Date: Aug 2022
Posts: 13
Rep Power: 4 ![]() |
Hi
I am trying to use reef3d simuilate three box side by side case according to "FLUID RESONANCE IN NARROW GAPS OF VERY LARGE FLOATING STRUCTURE COMPOSED OF RECTANGULAR MODULES". it is my first time to use this software, so I build my case based on the tut "Non-Breaking Wave Forces" just as bellow, it is my first confusion, why I shouldn't set the layers for the turbulence model. After the simulation is done, the phi=0 surface accur in the box(as the screenshot2 shows). What's going on here? Did I make a mistake in my calculations? All the setting files has benn upload. |
|
![]() |
![]() |
![]() |
![]() |
#2 |
Member
Alexander Hanke
Join Date: Dec 2023
Location: Trondheim
Posts: 52
Rep Power: 4 ![]() |
Hei.
What do you mean with the following?If you are talking about local wall refinement layers that exist in OpenFOAM for example, they do not exist in REEF3D at the moment. No, you did not make a mistake in your simulation that is obvious to me. The free surface in REEF3D is described with a continuous function, which currently is only expected to be accurate outside of solids. |
|
![]() |
![]() |
![]() |
![]() |
#3 |
Super Moderator
Hans Bihs
Join Date: Jun 2009
Location: Trondheim, Norway
Posts: 405
Rep Power: 19 ![]() |
The level set set function zero contour inside the bodies are due to paraview visualization only.
|
|
![]() |
![]() |
![]() |
![]() |
#4 | |
New Member
Yupeng Duan
Join Date: Aug 2022
Posts: 13
Rep Power: 4 ![]() |
Quote:
Ok, thank you, I will continue to follow this example with subsequent simulations, do you have any other notes you'd like to tell me about similar examples? |
||
![]() |
![]() |
![]() |
![]() |
#5 |
New Member
Yupeng Duan
Join Date: Aug 2022
Posts: 13
Rep Power: 4 ![]() |
||
![]() |
![]() |
![]() |
![]() |
#6 |
New Member
Yupeng Duan
Join Date: Aug 2022
Posts: 13
Rep Power: 4 ![]() |
Sorry Can you answer another question? please.
According to the user guid manuel, it seems that the user can only define a "force box" to out put the force , how can I out put the force for the side-by-side fixed boxs separately. |
|
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Radial Fan (MRF/RBM). Problem with Rigid Body Motion -RBM | Karen Martirosyan | Main CFD Forum | 0 | February 28, 2021 06:19 |
problem with p_rgh BC and recirculation inside my domain | kevin | OpenFOAM Running, Solving & CFD | 1 | August 23, 2016 11:29 |
Creating named selections on inside body surfaces | lbergmann | CFX | 7 | April 11, 2014 18:19 |
[ICEM] Mesh body inside body | Bollonga | ANSYS Meshing & Geometry | 4 | October 10, 2013 05:38 |
Any body help me!, Impeller simulation problem. | Desperado | FLUENT | 2 | June 9, 2009 14:04 |