porous structures

vamsikrishna00 · May 15, 2024, 02:57

Hello seniors,
myself vamsi krishna, I'm new to CFD
I created a trapezoidal shape structure (callled breakwater) in figure, for this structure i want to add the porosity for complete structure.
how to add porosity to the structure? Is it possible to add 35% of porosity to the complete structure.?

Thank you.

harenaobsidet · May 20, 2024, 06:57

Hi.
You can add such a structure using the VRANS implementation. With options B 270 until B 291 you could construct it. I don't know if there currently is an option to read an .stl or something.

vamsikrishna00 · May 20, 2024, 08:00

yes, i will try

thank you sir

May 20, 2024, 06:57		#2
harenaobsidet New Member Alexander Hanke Join Date: Dec 2023 Location: Trondheim Posts: 25 Rep Power: 3	Hi. You can add such a structure using the VRANS implementation. With options B 270 until B 291 you could construct it. I don't know if there currently is an option to read an .stl or something. __________________ Alexander Hanke Team REEF3D www.reef3d.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thermal non-equilibrium porous media model with conjugate heat transfer	Hexahedron	FLUENT	9	February 22, 2023 02:55
Properties as a function of space/cellzone – porous region	absorbedsponge	OpenFOAM Pre-Processing	0	September 29, 2021 14:59
Porous Media Zone Thickness	TheKitchenCleaner	FLUENT	0	October 5, 2020 00:42
Porous Media in Star-CCM+	bcowling	STAR-CCM+	7	June 24, 2020 12:01
Porous forces on multiple porous structures	sk11	OpenFOAM Post-Processing	0	June 18, 2018 09:58

May 20, 2024, 08:00		#3
vamsikrishna00 New Member vamsi krishna Join Date: May 2024 Posts: 13 Rep Power: 2	yes, i will try thank you sir