|
[Sponsors] |
October 4, 2012, 01:31 |
simple spray problem
|
#1 |
New Member
Krishna
Join Date: Aug 2011
Location: Japan
Posts: 26
Rep Power: 14 |
Hello,
I am struggling with simple spray problem. If anybody aware of this please help me out. in star.info file I am getting like this. Time step = 2; Elapsed time = 2.000000E-05 s; Period = 1 ================================================== =============== *** Injection Subroutine: Status on Entry *** Total Droplets : 0 Active Droplets : 0 Parent Droplets : 0 Stuck Droplets : 0 Deleted Droplets : 0 Total Liquid Mass : 0.0000 FUEL INJECTION AND NOZZLE MODELING ================================== INJECTOR MASS INJECTED EFF. INJ. VEL. SPRAY ANGLE 1 0.0000 0.0000 0.0000 *** Injection Subroutine: Status on Exit *** Total Droplets : 0 Active Droplets : 0 Parent Droplets : 0 Stuck Droplets : 0 Deleted Droplets : 0 Total Liquid Mass : 0.0000 I have defined a droplet and starting and stopping time massflow rate everything. but I can not able to see in sumulation. Can you pleas ehelp me out. Thanks in advance. Krishna |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Simple mathematical problem? | Frank Wedburn | Main CFD Forum | 8 | March 23, 2012 17:26 |
Initial &Boundary conditions for pressure in cavity flow problem with SIMPLE approach | Mehdi-Sanaei | Main CFD Forum | 0 | May 7, 2011 04:02 |
Simple Impinging Fountain problem | MarkK | CFX | 4 | February 5, 2011 05:30 |
A simple heat transfer problem ? | iggor | FLUENT | 1 | June 15, 2009 04:42 |
? Simple CFD problem | Davy | Main CFD Forum | 0 | August 21, 1998 06:19 |