 |
 |
 |
|
|
|
[Sponsors] | ||||
April 20, 2018, 07:48
|
Streamline view Star CCM+
|
#1 |
|
New Member
Ingrid Sandvik
Join Date: Mar 2018
Posts: 2
Rep Power: 0  |
Hi everybody!
 I'm using Star CCM+ to simulate a u-tube cooler. I am trying to make a streamline view of the velocity of the gas inside the pipes, but I can't manage to get the lines all the way through the pipes. They breaks on the halfway, and I don't understand what the problem could be. I'm happy if any of you have a suggestion for what I can do! Thanks in advance! Ingrid 
|
|
|
|
|
|
April 24, 2018, 10:52
|
|
#2 |
|
Senior Member
Ping
Join Date: Mar 2009
Posts: 556
Rep Power: 21 |
this should be in the ccm forum
looks like you need to take a look at the streamline properties and run them for longer since they are not ending at the walls |
|
|
|
|
|
|
July 23, 2021, 08:18
|
|
#3 |
|
New Member
chenlong
Join Date: Jul 2021
Posts: 1
Rep Power: 0 |
i think so！
|
|
|
|
|
|
 |
| Tags |
| streamlines break |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| problem when imported geometry from 3D CAD to star ccm, | TAREK GANAT | STAR-CCM+ | 1 | May 21, 2013 23:15 |
| [Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 05:04 |
| [Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 05:38 |
| error in star ccm | maurizio | Siemens | 3 | October 16, 2007 06:17 |
| [Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 05:15 |
1Likes
Linear Mode
