CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

turbulence convergence

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   November 19, 2002, 03:47
Default turbulence convergence
Posts: n/a

After getting the solution, I am facing a difficulty in judging that the particular set of input turbulence parameters (example; Dissipation length scale & Turbulence intensity in standard K E modal), being selected are correct. For this, should I check the residuals of turbulence only or do I need to check something else.

I will appreciate your guidance in this regard

  Reply With Quote

Old   November 19, 2002, 04:38
Default Re: turbulence convergence
Posts: n/a
If you are only considering turbulent quantities from the convergence point of view, I think the only good way to say if your solution is converged is to run the case with two different convergence criteria and see if the result changes. If not, then you should be ok.
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
convergence issue with turbulence mar Siemens 5 February 2, 2015 02:42
Laminar Turbulence convergence Paul S. FLUENT 3 October 29, 2008 09:19
Turbulence model convergence problem Andrew CFX 7 August 17, 2008 19:35
Convergence problems with SSG turbulence model Ram CFX 1 June 19, 2006 10:08
residual convergence with turbulence modeling eddybreakup Main CFD Forum 0 June 10, 2004 16:17

All times are GMT -4. The time now is 07:57.