CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

segmentation fault

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 9, 2004, 06:14
Default segmentation fault
  #1
natesan
Guest
 
Posts: n/a
While trying to run a problem in star solver, I am getting an error message like 'segmentation fault'. Can any body advice me to resolve this difficulty. Thanks in advance
  Reply With Quote

Old   January 9, 2004, 09:02
Default Re: segmentation fault
  #2
Richard
Guest
 
Posts: n/a
It could be anything - kernel limits, shell limits, a bug in your user subroutines (if you have them), a bug in STAR itself, a bug in the compiler. Contact your STAR support office with this problem.
  Reply With Quote

Old   January 9, 2004, 09:57
Default Re: segmentation fault
  #3
Joel
Guest
 
Posts: n/a
star throws those segmentation faults up fairly regulally, you just have to watch and find out what you or it is doing at the time it comes up and then try and change it.
  Reply With Quote

Old   January 11, 2004, 23:30
Default Re: segmentation fault
  #4
natesan
Guest
 
Posts: n/a
Thanks for your help. The same problem is running without any trouble when I make all the cell types with 'no radiation'. Could you now guess what could be the problem in my model.
  Reply With Quote

Old   January 12, 2004, 08:51
Default Re: segmentation fault
  #5
nicola
Guest
 
Posts: n/a
Problems with radiation are especially in transient calculations hard to solve. Ask your support, they will solve your problem...
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Technical] Segmentation fault in map msg30 OpenFOAM Meshing & Mesh Conversion 6 March 27, 2008 10:49
Segmentation fault billy OpenFOAM Installation 20 April 23, 2007 22:57
segmentation fault tipakorn Siemens 6 July 31, 2006 07:56
Segmentation fault Veebs Siemens 3 June 4, 2002 22:17
Segmentation fault Jose Sanchez Siemens 1 December 16, 2001 08:13


All times are GMT -4. The time now is 21:30.