|
[Sponsors] |
January 14, 2004, 06:00 |
Mesh Warning
|
#1 |
Guest
Posts: n/a
|
Hello there Star users,
i've come up against a problem in Star when generating a mesh of my model. its a very simple space with 3 boxes in the space representing volumetric heat inputs, each one is assigned to 400watts - these represent fluid subdomains in my model. The cartesian mesh reports back the following warnings: warning: material point at (3.6,1.5,0.3) on boundary warning: material point at (3.6,3.5,0.3) on boundary warning: material point at (3.6,5.5,0.3) on boundary the locations mentioned above are the centre points of my boxes. Thus the heat is not represented in my model. my space is small say 5mx7mx3.2m tall with some inlets and outlet/pressure boundaries with cartesian mesh set to 0.1,0.1,0.1m the fluid subdomain boxes are 4mx0.5mx0.2m tall and they sit 0.2m off the floor level Any advice out there on why this is happening thanks in advance -ted |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[blockMesh] Mesh skewness warning how to get rid | ploceus | OpenFOAM Meshing & Mesh Conversion | 2 | July 1, 2009 06:01 |
CFX-Pre warning with *msh mesh file. | KM | CFX | 2 | November 5, 2007 12:50 |
warning given by fluent when read mesh file | major | FLUENT | 5 | October 7, 2006 10:38 |
Warning #090 | Tunc | Siemens | 2 | October 31, 2005 13:26 |
import mesh error/warning | Laxminarayana | FLUENT | 1 | February 15, 2005 09:49 |