CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

scalars of different phase

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 27, 2004, 05:09
Default scalars of different phase
  #1
novice
Guest
 
Posts: n/a
In starcd is it possible to simulate the scalars with different phases. e.g. mixture of air and oil in transient analysis. My problem is- because of turbulence air is getting mixded in oil, and this has to be simulated transiently. Turbulence level is very high so there are large number of very small air pockets in oil and deliverable is how much the oil properties are changing. Pl guide. Thanks
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Discrete phase model: number of scalars in UDFmenu Novice FLUENT 0 December 3, 2008 03:05
passive scalars CMB Siemens 2 February 16, 2004 09:46
Passive Scalars CMB Siemens 2 January 15, 2004 08:27
passive scalars CMB Siemens 0 December 10, 2003 06:14
negative scalars ! Ossi Kaario Siemens 7 March 14, 2001 01:26


All times are GMT -4. The time now is 10:41.