 |
 |
 |
|
|
|
[Sponsors] | ||||
How Rconstant and Switch influence in starcd? |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 28, 2005, 04:14
|
How Rconstant and Switch influence in starcd?
|
#1 |
|
Guest
Posts: n/a
|
Hello,everyone!
Do anyone know how Rconstant and Switch influence in starcd, and what's meaning of every value of Rconstant and Switch? It is very important for me! xhliu1 |
|
|
||
|
June 28, 2005, 04:33
|
Re: How Rconstant and Switch influence in starcd?
|
#2 |
|
Guest
Posts: n/a
|
Contact CD-Adapco
|
|
|
|
||
|
June 28, 2005, 08:39
|
Re: How Rconstant and Switch influence in starcd?
|
#3 |
|
Guest
Posts: n/a
|
rcons and switches are used to activate beta level and advanced features not available in the rest of the gui or through commands. They are very specific and shouldnt be used without contacting your local support office first.
|
|
|
|
||
|
July 1, 2005, 11:17
|
Re: How Rconstant and Switch influence in starcd?
|
#4 |
|
Guest
Posts: n/a
|
You should use this only when you have problems with the run( Strongly recommandation) Switch 50 is in usefull in generell: writes a *.ctrl file for URFs. It will be read at every timestep.
|
|
|
|
||
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| switch 81 | isidro | Siemens | 1 | February 19, 2004 15:24 |
| SWITCH FILE | Juliet | Siemens | 2 | November 26, 2003 23:49 |
| switch n.1 | roadracer | Siemens | 11 | July 8, 2003 06:07 |
| switch | Moon | Siemens | 4 | February 25, 2003 02:23 |
| Convert from StarCD 3.10 to StarCD 3.15 | Jing | Siemens | 1 | April 17, 2002 09:22 |
Linear Mode
