mass flow rate -- CFD Online Discussion Forums

November 28, 2005, 05:13	mass flow rate	#1
Dr C.Bhasker Guest Posts: n/a	Star-CD users! I have recently solved a problem of complex duct with multiple outlets in Fluent/CFX/Star-CD under identical flow conditions and obtained the convergence of numerical solution in all the solvers. I am very much impressed about flow pattern captured at mid-section of the duct in star-CD over other solvers. In other solvers, I could able to obtain mass flow rates at different outlets by mouse click. I am unable to find the same in star-CD. Can any one suggest a way as how to obtain mass flow rate at different outlets through single command. Towards this I am spending quite lot of time in Star-CD. Dr C.Bhasker

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mass flow rate of the DPM mass sourse ??	Rhinocao	FLUENT	3	January 21, 2011 12:10
Mass Flow Rate!!!	haiduc	FLUENT	1	June 7, 2007 10:08
DMP mass flow rate	Don Parsons	FLUENT	3	April 17, 2007 02:30
Mass flux and mass flow rate	us	Phoenics	10	March 31, 2006 02:06
How are the mass flux and mass flow rate defined?	Miles	Siemens	2	November 7, 2002 08:45

All times are GMT -4. The time now is 03:49.