CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

baffle usage.

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   January 12, 2006, 01:37
Default baffle usage.
Posts: n/a
recently,I want to model the flow past a baffle with the roughness effect.but I don't know how to use baffle command. if I use baffle(in locate boundary panel),when saving geometry file.there are some errors.Another way is to use the cell tool .using "add baffles" selection.but there is a shortcoming in this way.this can not be applied the roughness . can anyone tells me how to use the baffle command.thank you very much.~
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
hot porous baffle azmir Siemens 0 February 9, 2006 19:25
HELP: baffle generation sunlight Siemens 3 July 29, 2005 03:07
Subroutine and Baffle yong Siemens 0 October 28, 2004 08:45
baffle in use guang ai Siemens 3 November 10, 2003 04:51
porosity of baffle raymond Siemens 4 April 4, 2002 04:03

All times are GMT -4. The time now is 08:31.