|
[Sponsors] |
November 28, 2008, 09:04 |
How can I call EM in subroutine-----sorent.f
|
#1 |
Guest
Posts: n/a
|
There are 3 subroutine used in a lagrangian two phase transient simulation-----drmast.f, drheat.f, sorent.f. The last one is used to add source term to continuou phase, and in this subroutine, a parameter difined in 'drmast.f'-----'EM' was used to difine the parameter S1P:
S1P = (-8240+7157+29326)*1000*EM S2P = 0 In order to use "EM" in 'sorent.f', I difined this in subroutine: CALL DRMAST(EM,DEMU) However, it seems that the 'sorent.f' subroutine didn't work.IS the "call" wrong? How can I use 'EM' in this subroutine? |
|
November 28, 2008, 11:12 |
Re: How can I call EM in subroutine-----sorent.f
|
#2 |
Guest
Posts: n/a
|
Sorent is called per cell, but drmast is called per droplet. EM in drmast is for a specific droplet, the one for which drmast is called. So it's not well posed to try to access EM in sorent - which droplet do you mean? There could be any number of droplets in the cell, all with a different EM.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
User Subroutine ----- sorent | conglin | Siemens | 2 | November 24, 2008 20:45 |
About Sorent.f | Choi | Siemens | 5 | June 10, 2005 05:19 |
call vertices into subroutine? | MG | Siemens | 2 | November 12, 2004 10:48 |
subroutine sorent.f | Peter | Siemens | 5 | April 15, 2004 01:25 |
subroutine call order | CMB | Siemens | 5 | November 27, 2003 10:34 |