CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

Rotating Disc in a Volume of Air

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   August 24, 2009, 13:59
Default Rotating Disc in a Volume of Air
New Member
Daniel McGregor
Join Date: Aug 2009
Location: Denver, Colorado
Posts: 5
Rep Power: 16
alcesalces is on a distinguished road
Hello All-

I am new to CFD solvers therefore would like benefit from the knowledge base this forum represents. Can CD-adapco solve the following test case?

Physical Problem Description/Definition:

a) Define a disc in a volume of air. The disc would of negligible thickness, but rigid. Since I intend to spin the disc about its central axis, I am thinking that it would be a good idea to take advantage of symmetry and define both the volume of air and the disc in a cylindrical coordinate system (not a requirement, but it would make pre- and post-processing easier, so software that makes this easy would be desirable).

Initial Conditions:

a) Assign a rotational velocity to the disc, i.e., assign a tangential (to the axis of rotation) surface velocity to the individual mesh elements of the disc. once again a preprocessor that would use a cylindrical coordinate system would be desirable...

b) the air in the volume (the cylindrical "can") is initially at rest and, if need be, the air in contact with the boundary of the volume would be zero.


a) solve for a steady state solution. the spinning disc should cause the air in the volume to spin as well. the steady state solution should be where the rotation of the air reaches equilibrium with the spinning disc. (At least this what I think should happen!!)

Post Processing:

a) have a look at the normal forces on the surface of the disc (induced by the Bernoulli effect) as a function of radius

b) have a look at how the air in the volume rotates as a function of the rotating disc

That's It! Can CD-adapco do the above?

Any help in narrowing my search for a solver (and pre- and post-processor) is appreciated!!
alcesalces is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rotating Disc in a Volume of Air alcesalces FLOW-3D 5 August 28, 2009 17:04
Solver for a Rotatinng Disc in a Volume of Air alcesalces Main CFD Forum 0 August 19, 2009 14:33
air bubble is disappear increasing time using vof xujjun CFX 9 June 9, 2009 07:59
On the damBreak4phaseFine cases paean OpenFOAM Running, Solving & CFD 0 November 14, 2008 21:14
[blockMesh] Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Meshing & Mesh Conversion 10 April 2, 2007 14:00

All times are GMT -4. The time now is 19:06.