Ricardo Vectis - Help me on spray details

July 16, 2007, 01:41

hi, is there any one who knows ricardo vectis spray setup? I have got doubt how to define a direction in the Ricardo vectis.

please help me

Regards,

Hari V.B.

August 31, 2007, 13:28

call me back on 9901307428. i will get u details about spray angle

seshram · February 3, 2010, 12:15

you have to specify the spray notepad file in the spray setup. the direction must be mensioned in the notepad file in terms of X, Y and Z direction. these values must be given as input in the spray setup also...

ishwarmara · February 11, 2013, 06:21

hi seshram and im there for u dear,
I m trying to simulate the combustion process in indirect injection diesel engine i have done compression successfully and results are matching with theoretical results but while combustion simulation it stops at 346.5 deg and says "P out of the range in PRPTY routine"
P = -33.61; Range 0.0-300
Please help me..........

I have conducted the simulation at least 40to 50 times i m getttinng te same error.......
Thanks in advance

ishwarmara · February 11, 2013, 06:27

Hi seshram and im there for u dear
I m trying to simulate the combustion process in Ricardo Vectis. I could simulate compression process successfully But during combustion at 345.5 deg it says the " P out of the range in prpty routine
P= -33.6; Range: 0.0-300".
Please hep me....i have the conducted the simulation at least 50times....i m getting the same msg...please help me...........

how to fix this
Thanks in advance........

July 16, 2007, 01:41	Ricardo Vectis - Help me on spray details	#1
Hari V.B. Guest Posts: n/a	hi, is there any one who knows ricardo vectis spray setup? I have got doubt how to define a direction in the Ricardo vectis. please help me Regards, Hari V.B.

August 31, 2007, 13:28	Re: Ricardo Vectis - Help me on spray details	#2
im there for u dear Guest Posts: n/a	call me back on 9901307428. i will get u details about spray angle

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WAVE Ricardo Software	CED	Main CFD Forum	45	May 31, 2019 04:24
vectis	Emanuele	Main CFD Forum	1	May 23, 2010 10:46
Vectis mesh format	Franjo	Main CFD Forum	0	January 5, 2006 04:01
STAR Vs. Vectis	Askmat	Siemens	1	September 3, 2003 10:37
Ricardo Vectis Users?	Donald H.	Main CFD Forum	0	August 10, 2002 02:10

February 3, 2010, 12:15		#3
seshram New Member seshram Join Date: Feb 2010 Posts: 2 Rep Power: 0	you have to specify the spray notepad file in the spray setup. the direction must be mensioned in the notepad file in terms of X, Y and Z direction. these values must be given as input in the spray setup also...

February 11, 2013, 06:21		#4
ishwarmara New Member Ishwar Mara Join Date: Oct 2012 Posts: 5 Rep Power: 13	hi seshram and im there for u dear, I m trying to simulate the combustion process in indirect injection diesel engine i have done compression successfully and results are matching with theoretical results but while combustion simulation it stops at 346.5 deg and says "P out of the range in PRPTY routine" P = -33.61; Range 0.0-300 Please help me.......... I have conducted the simulation at least 40to 50 times i m getttinng te same error....... Thanks in advance

February 11, 2013, 06:27		#5
ishwarmara New Member Ishwar Mara Join Date: Oct 2012 Posts: 5 Rep Power: 13	Hi seshram and im there for u dear I m trying to simulate the combustion process in Ricardo Vectis. I could simulate compression process successfully But during combustion at 345.5 deg it says the " P out of the range in prpty routine P= -33.6; Range: 0.0-300". Please hep me....i have the conducted the simulation at least 50times....i m getting the same msg...please help me........... how to fix this Thanks in advance........