|
[Sponsors] |
Basic/Elementary Flow Simulation in Star CCM+? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 28, 2014, 17:54 |
Basic/Elementary Flow Simulation in Star CCM+?
|
#1 |
New Member
Chad Harris
Join Date: Aug 2014
Posts: 1
Rep Power: 0 |
Hi I am relatively new to Star CCM+ (and even CFD as a whole) but I wanted to do some basic flow simulation (air/fluid etc.) on a few imported CAD products.
Is there some sort of standard process to follow or things to keep in mind in order to successfully test aerodynamics or fluid dynamics on my CAD models? -I have gone through a few tutorials but I ended up really lost halfway through -I also am confused about the concept of meshing... Thanks a lot |
|
Tags |
aerodynamics, dynamics, flow, mesh, simulation |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Review: Reversed flow | CRT | FLUENT | 1 | May 7, 2018 05:36 |
[Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 04:04 |
Natural convection - Inlet boundary condition | max91 | CFX | 1 | July 29, 2008 20:28 |
error in star ccm | maurizio | Siemens | 3 | October 16, 2007 05:17 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |