CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

Star-CCM+ performance in different Linux distros.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 5, 2017, 04:23
Question Star-CCM+ performance in different Linux distros.
  #1
New Member
 
Serg
Join Date: Jul 2017
Posts: 1
Rep Power: 0
severgun is on a distinguished road
Hello, guys.

Is there any enthusiasts which benchmark and tune linux distros for best performance in star-ccm+? Can you give me an advice?

I have HPC cluster with netboot image based on Debian 7(kernel 3.2.63) without noticeable tuning. I tried to do some starccm+ benchmarks at one node with 4 Opteron CPUs (1-64cores)
Code:
/opt/StarCCM/STAR-CCM+12.02.010/star/bin/starccm+ -locale en:US -power -pio -benchmark:"-preits 1 -nits 10 -tag opteron_63 -nps 1,2,4,8,16,24,32,40,48,63,64" -on localhost -np 64 -cpubind v /home/user/test.sim
Debian 7(3.2.63) vs Debian 9(4.9.30) vs CenOS 7(3.10.0) and both new distros are worse
(upto -10%) than old one.
So I have a couple of questions:
1) Which distro is the best. May be someone done this research?
2) New distos(kernels) are so bad or I'm doing something wrong?
3) Is it possible to tune performance for ccm+? If so, can you tell me how to do it?
severgun is offline   Reply With Quote

Reply

Tags
linux, linux distros, performance tuning, star-ccm+

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
problem when imported geometry from 3D CAD to star ccm, TAREK GANAT STAR-CCM+ 1 May 21, 2013 22:15
[Commercial meshers] Using starToFoam clo OpenFOAM Meshing & Mesh Conversion 33 September 26, 2012 04:04
[Other] StarToFoam error Kart OpenFOAM Meshing & Mesh Conversion 1 February 4, 2010 04:38
error in star ccm maurizio Siemens 3 October 16, 2007 05:17
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 04:15


All times are GMT -4. The time now is 01:21.