Chemical Reaction Maximum Step for Combustion CFD-STARCCM

Stalline · November 18, 2019, 05:05

Hello, I need some help for the combustion simulation
I used StarCCM to do simulation, and usually for the chemical reaction, thermo and transport I use GRI 3.0 Mechanism (more than 300 reaction steps).

Actually I got good result when I use GRI 3.0 mech, even though when I check the OH mole fraction, it show little bit long concentration region, but the temperature looks fine

so I want to test using another chemical reaction and right now I want to use USC version II (more than 700 reaction steps).

when I tried to import it to StarCCM it just loading and take so much time, I think it is not normal. So is there any limit for the chemical reaction steps for StarCCM?

fyi, I usually use 30 cores for load the GRI and it is quite fast

I really appreciate if there is somebody can help me to overcome this problem

LuckyTran · November 20, 2019, 14:04

There shouldn't be any limit...

Reading the reactions is simply reading a text file, using a million cores will not speed this up.

Stalline · November 20, 2019, 22:21

Quote:

Originally Posted by LuckyTran

There shouldn't be any limit...

Reading the reactions is simply reading a text file, using a million cores will not speed this up.

Thank you Mr Lucky Tran, well I tried to import it and leave it for one day, and the mechanism still not imported yet, I don't know what happened actually

November 18, 2019, 05:05	Chemical Reaction Maximum Step for Combustion CFD-STARCCM	#1
Stalline New Member Stalline Join Date: Nov 2019 Posts: 2 Rep Power: 0	Hello, I need some help for the combustion simulation I used StarCCM to do simulation, and usually for the chemical reaction, thermo and transport I use GRI 3.0 Mechanism (more than 300 reaction steps). Actually I got good result when I use GRI 3.0 mech, even though when I check the OH mole fraction, it show little bit long concentration region, but the temperature looks fine so I want to test using another chemical reaction and right now I want to use USC version II (more than 700 reaction steps). when I tried to import it to StarCCM it just loading and take so much time, I think it is not normal. So is there any limit for the chemical reaction steps for StarCCM? fyi, I usually use 30 cores for load the GRI and it is quite fast I really appreciate if there is somebody can help me to overcome this problem

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
courant number increases to rather large values	6863523	OpenFOAM Running, Solving & CFD	22	July 5, 2023 23:48
How to find the heat release of chemical reaction each time step	DChAS3R	FLUENT	0	April 14, 2019 22:42
p_rgh initial residual no change with different settings	manuc	OpenFOAM Running, Solving & CFD	3	June 26, 2018 15:53
pimpleDyMFoam computation randomly stops	babapeti	OpenFOAM Running, Solving & CFD	5	January 24, 2018 05:28
CFD of mixing with chemical reaction	Dr. Eng. Mounir BOUAIFI	Main CFD Forum	2	January 11, 1999 08:30

November 20, 2019, 14:04		#2
LuckyTran Senior Member Lucky Join Date: Apr 2011 Location: Orlando, FL USA Posts: 5,674 Rep Power: 66	There shouldn't be any limit... Reading the reactions is simply reading a text file, using a million cores will not speed this up.