 |
 |
 |
|
|
|
[Sponsors] | ||||
Import structured Pointwise surface mesh to Star-CCM+ |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 23, 2021, 09:38
|
Import structured Pointwise surface mesh to Star-CCM+
|
#1 |
|
New Member
Georg
Join Date: Dec 2020
Posts: 10
Rep Power: 6  |
Hi there,
I have created a high-quality, structured surface mesh in Pointwise and would like to use it for further unstructured volume meshing in Star-CCM+. I already have a lower-quality mesh with the same geometry in Star-CCM+ and would ideally like to simply replace the surface mesh of my object with said structured one. Has anyone else tried such a hybrid meshing approach and can give me any advice? Best regards 
|
|
|
|
|
|
| Tags |
| import mesh, pointwise, star-ccm+, surface mesh |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [ICEM] 2D hybrid mesh (unstructured mesh highly dependent on structured mesh parameters) | shubham jain | ANSYS Meshing & Geometry | 1 | April 10, 2017 05:03 |
| 17.3 Pointwise can NOT import CGNS mesh with Multiple nodes | swm | Pointwise & Gridgen | 3 | January 24, 2017 10:48 |
| [snappyHexMesh] SnappyHexMesh no layers and no decent mesh for complex geometry | pizzaspinate | OpenFOAM Meshing & Mesh Conversion | 1 | February 25, 2015 07:05 |
| [OpenFOAM] Annoying issue of automatic "Rescale to Data Range " with paraFoam/paraview 3.12 | keepfit | ParaView | 60 | September 18, 2013 03:23 |
| CFX4.3 -build analysis form | Chie Min | CFX | 5 | July 12, 2001 23:19 |
Linear Mode
