 |
 |
 |
|
|
|
[Sponsors] | ||||
January 28, 2017, 07:31
|
Ansys Structural Problem
|
#1 |
|
New Member
Join Date: Jan 2017
Posts: 1
Rep Power: 0  |
Hi, im new to Ansys, using Mechanical APDL 15.
The problem i am trying to model is attached. It is a cylinder/pipe in which i will be varying the thickness in order to meet certain criteria. The discs themselves can be ignored in this model. The first question i have is, which is the best way to model this so that i can vary the thickness easily? Option 1 - Creating a Annulus and extruding to a volume Option 2 - Creating a cylinder The next question i have is how can i add the 6 4mm diameter holes to the model. I know how to do this along the x and y planes, but not sure how i can do this in the z plane. Any help would be appreciated. |
|
|
|
|
|
March 17, 2017, 06:38
|
|
#2 |
|
Senior Member
Onur Özcan
Join Date: Feb 2016
Location: Istanbul/Turkey
Posts: 461
Rep Power: 12 |
Loads are vectorial. You can do it in 2D
|
|
|
|
|
|
|
April 6, 2017, 23:47
|
|
#3 |
|
New Member
karthi
Join Date: Mar 2017
Posts: 7
Rep Power: 9 |
||
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [Workbench] ANSYS Workbench CAD Interface for CATIA problem | NHeidfeld | ANSYS Meshing & Geometry | 6 | September 18, 2016 12:52 |
| Ansys SIG$ILL error | loth | ANSYS | 3 | December 24, 2015 05:31 |
| solving problem on ansys 12 workbench | ckdarky | ANSYS | 1 | April 27, 2011 05:32 |
| Ansys Workbench contact problem! | JoelHenrik | ANSYS | 1 | October 1, 2010 14:57 |
| Ansys CFX bucket problem | njsavage | Main CFD Forum | 1 | April 30, 2009 09:48 |
Linear Mode
