Mutation++ Doesn't Work With CODI [ver. 7.5.0]

CleverBoy · January 11, 2023, 15:19

Hello everybody,

I installed the new version but when I want to use M++ with nemo it says,

Code:

Either 1) Mutation++ has not been configured/compiled (add '-Denable-mpp=true' to your meson string)
or 2) CODI must be deactivated since it is not compatible with Mutation++.

I compiled SU2 with M++. How can I deactivate CODI? I don't even know what it is. There was no issue like this before when I first Reconfigured ver7.4.0 to build M++.

wallym · January 12, 2023, 09:45

Hi CleverBoy,

You can simply add the lines "-Denable-autodiff=false" when you perform your meson scripts. Unfortunately M++ and autodiff don't play nice together just yet.

January 11, 2023, 15:19	Mutation++ Doesn't Work With CODI [ver. 7.5.0]	#1
CleverBoy Member Ercan Umut Join Date: Aug 2022 Posts: 51 Rep Power: 4	Hello everybody, I installed the new version but when I want to use M++ with nemo it says, Code: Either 1) Mutation++ has not been configured/compiled (add '-Denable-mpp=true' to your meson string) or 2) CODI must be deactivated since it is not compatible with Mutation++. I compiled SU2 with M++. How can I deactivate CODI? I don't even know what it is. There was no issue like this before when I first Reconfigured ver7.4.0 to build M++.

January 12, 2023, 09:45		#2
wallym Senior Member Wally Maier Join Date: Apr 2019 Posts: 123 Rep Power: 7	Hi CleverBoy, You can simply add the lines "-Denable-autodiff=false" when you perform your meson scripts. Unfortunately M++ and autodiff don't play nice together just yet. CleverBoy likes this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Salome] problem with work flow: freeCAD => Salome => cfMesh	mmohaqeqf	OpenFOAM Meshing & Mesh Conversion	3	February 22, 2023 05:00
First order in fvSchemes does not seem to work	gerritgroot	OpenFOAM Running, Solving & CFD	0	September 30, 2015 21:06
ATTENTION! Reliability problems in CFX 5.7	Joseph	CFX	14	April 20, 2010 16:45