[Abhii]

Hi I am tryng to run test case for drag prediction workshop, however SU2 exits abruptly with following message

SU2_CFD:4351 terminated with signal 11 at PC=7fcddb SP=7fffe4b692f8. Backtrace:
/sb/project/sks-412-aa/SU2v2.0/trunk/SU2Py/SU2_CFD(__intel_ssse3_rep_memcpy+0xceb)[0x7fcddb]
/sb/project/sks-412-aa/SU2v2.0/trunk/SU2Py/SU2_CFD(_intel_fast_memcpy.P+0x6)[0x7f5506]
/software/tools/openmpi-1.4.3-intel/lib/libmpi.so.0(ompi_convertor_pack+0x15c)[0x2afed4d856cc]
/software/tools/openmpi-1.4.3-intel/lib/libmpi.so.0[0x2afed4e5b475]
/software/tools/openmpi-1.4.3-intel/lib/libmpi.so.0(PMPI_Bsend+0x5f)[0x2afed4d8d89f]
/sb/project/sks-412-aa/SU2v2.0/trunk/SU2Py/SU2_CFD(_ZN14CEulerSolution16MPI_Send_ReceiveEPPP9 CGeometryPPPP9CSolutionPP7CConfigtt+0xf62)[0x609542]
/sb/project/sks-412-aa/SU2v2.0/trunk/SU2Py/SU2_CFD(_ZN21CMultiGridIntegration13FAS_MultigridE PPP9CGeometryPPPP9CSolutionPPPPP9CNumericsPP7CConf igtttmt+0x154)[0x4acdb4]
/sb/project/sks-412-aa/SU2v2.0/trunk/SU2Py/SU2_CFD(_ZN21CMultiGridIntegration19SetMultiGrid_S olverEPPP9CGeometryPPPP9CSolutionPPPPP9CNumericsPP 7CConfigtmt+0x216)[0x4acbb6]
/sb/project/sks-412-aa/SU2v2.0/trunk/SU2Py/SU2_CFD(_Z17MeanFlowIterationP7COutputPPP12CIntegr ationPPP9CGeometryPPPP9CSolutionPPPPP9CNumericsPP7 CConfigPP16CSurfaceMovementPP19CVolumetricMovement PPP14CFreeFormChunkm+0x1a7)[0x4b8087]
/sb/project/sks-412-aa/SU2v2.0/trunk/SU2Py/SU2_CFD(main+0xdc9)[0x692069]
/lib64/libc.so.6(__libc_start_main+0xf4)[0x360aa1d994]
/sb/project/sks-412-aa/SU2v2.0/trunk/SU2Py/SU2_CFD(_ZNSt8ios_base4InitD1Ev+0x41)[0x45ed99]
--------------------------------------------------------------------------
mpirun has exited due to process rank 18 with PID 4351 on
node sw-2r08-n41 exiting without calling "finalize". This may
have caused other processes in the application to be
terminated by signals sent by mpirun (as reported here).
--------------------------------------------------------------------------
Traceback (most recent call last):
File "/sb/project/sks-412-aa/SU2v2.0/trunk/SU2Py/merge_solution.py", line 346, in <module>
input_file = open("%s_%s.vtk" % (volume_flow_filename, domain+1))
IOError: [Errno 2] No such file or directory: 'flow_DPW4_wbt_ih_0_v03_1.vtk'

I have attached output & cfg file for your regerence , I was wondering if you could help me verifying if I am using right configuration setting on my cfg

Thanks in advance for your help in this regard.

Abhiioutputfile.txt

turb_DLRF6_WBH_i_0_cfg.txt

[economon]

Hi,

It looks like you might be running a slightly older version of SU2. You might give this another shot with the most recent version of the code (V2.0.8) that is available directly on GitHub: https://github.com/su2code. The more recent versions have updates to improve the parallelization, robustness, etc.

Thanks for using SU2!
Tom