How do I obtain Pitch and Plunge values from simulation history?

pro_ · April 9, 2020, 11:00

I have tried to simulate the 2D Flutter case for both pitch and plunge. Using the aeroelastic test case as a template. How is it that I can print the pitch and plunge in the console but not store the values in my history.csv file?, If i can how should i go about it?
I have tried including 'PITCH' and 'PLUNGE' in the HISTORY_OUTPUT but neither results were written.

pcg · April 9, 2020, 13:05

Try adding AEROELASTIC to the history output.
The history output works by groups instead of individual names, e.g. lift, drag, etc. are in group AERO_COEFF.

pro_ · April 10, 2020, 06:50

Quote:

Originally Posted by pcg

Try adding AEROELASTIC to the history output.
The history output works by groups instead of individual names, e.g. lift, drag, etc. are in group AERO_COEFF.

Works, Thank you!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pitch and Plunge	JAlbert	SU2 Shape Design	1	August 19, 2013 17:04
Trying to Write pitch and Plunge UDF	Alex	FLUENT	0	March 18, 2006 17:14

April 9, 2020, 13:05		#2
pcg Senior Member Pedro Gomes Join Date: Dec 2017 Posts: 467 Rep Power: 15	Try adding AEROELASTIC to the history output. The history output works by groups instead of individual names, e.g. lift, drag, etc. are in group AERO_COEFF.