|
[Sponsors] |
Restarting From A Converged Solution With A Deformed Mesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 30, 2021, 11:02 |
Restarting From A Converged Solution With A Deformed Mesh
|
#1 |
New Member
Omur Icke
Join Date: Apr 2016
Posts: 6
Rep Power: 10 |
Hello All,
I use SU2 to compute flow regime of a propeller geometry by using the unsteady compressible flow scheme. To shorten the computation time that I spent to reach out the limiting cycle, I want to simulate deformed mesh, which is generated by SU2_DEF, by restarting from a previously converged solution. I don't get any error and everything works fine in terms of process. However, when I checked the output data, I realized that it uses original mesh in the restart file not the deformed mesh. How can I resolve this problem? If you have an idea, please share with me. I use rigid body motion type rotation and in the config file, I just change the Mesh input flag. Best, Omur |
|
Tags |
deformed mesh, restart problem, rotating, unsteady |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
foam-extend-4.1 release | hjasak | OpenFOAM Announcements from Other Sources | 19 | July 16, 2021 05:02 |
decomposePar problem: Cell 0contains face labels out of range | vaina74 | OpenFOAM Pre-Processing | 37 | July 20, 2020 05:38 |
Gambit problems | Althea | FLUENT | 22 | January 4, 2017 03:19 |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 18:57 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 03:52 |