|
[Sponsors] |
February 17, 2022, 11:41 |
Help with postprocessing multi-zone case.
|
#1 |
New Member
Anonymous
Join Date: Oct 2021
Posts: 8
Rep Power: 4 |
zone_1.txt
zone_2.txt vol007-edit.txt I'm attempting to post-process a case to prepare it for adjoint calculations and wish for some "hand-holding." I'm looking for a place to start understanding and analyzing what is going on, using a known-case that works. This base case involves a hub, nacelle, propeller, and wing. I have attached the main configuration and the sub-zone configuration files here. I believe I have the results of running this preliminary case, but I don't really know where to start in terms of post processing this. I have a .vtu file for each 500 iterations, for each surface zone, up to files numbered 69000. Zone_1.cfg appears to be the zone with motion and zone_2 is static. I'm looking at the trend lines of the residual data and it looks like things have mostly settled but there is a some up-tick of the line at the end. Thanks in advance. Last edited by CurvingFlow; February 17, 2022 at 15:43. Reason: Added config files |
|
Tags |
multi-zone, postprocessing |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to combine multiple meshes and create multi zone mesh | koray | SU2 | 0 | December 26, 2020 12:05 |
[Commercial meshers] Mesh conversion problem (fluent3DMeshToFoam) | Aadhavan | OpenFOAM Meshing & Mesh Conversion | 2 | March 8, 2018 01:47 |
[Resolved] GPU on Fluent | Daveo643 | FLUENT | 4 | March 7, 2018 08:02 |
[Other] How to create an MRF zone ? | aminem | OpenFOAM Meshing & Mesh Conversion | 2 | December 8, 2014 10:45 |
[GAMBIT] periodic faces not matching | Aadhavan | ANSYS Meshing & Geometry | 6 | August 31, 2013 11:25 |