|
[Sponsors] |
How to combine multiple meshes and create multi zone mesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 26, 2020, 13:05 |
How to combine multiple meshes and create multi zone mesh
|
#1 |
New Member
Join Date: Nov 2012
Posts: 18
Rep Power: 14 |
Dear SU2 Community
Currently, I am trying to figure out how to run a multi-row turbomachinery problem. I went through the test cases to see the structure. However the way that the grid was built, is not explained in there. I need to prepare a multi zone simulation with a single mesh file input. Even, when I combine multiple rows of mesh (I tend to start with only two rows, to see how thing work, for now) in a single file, when I try to read it with SU2_CFD, it says the mesh has only one zone. There is a Python file, merge.py, that may help but I am not sure. Up to now I created grid files in commercial software and export them in CGNS format. Time to time, I tried to convert and manipulate the grid in Gmsh. Once, I also used SU2_DEF to indirectly convert the file format. Anyways, I couldn't succeed. Any comment will be appreciated. Many thanks for your help. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
decomposePar problem: Cell 0contains face labels out of range | vaina74 | OpenFOAM Pre-Processing | 37 | July 20, 2020 06:38 |
[mesh manipulation] Multiple overlapping meshes | koala | OpenFOAM Meshing & Mesh Conversion | 1 | February 1, 2017 06:53 |
Possible Bug in pimpleFoam (or createPatch) (or fluent3DMeshToFoam) | cfdonline2mohsen | OpenFOAM | 3 | October 21, 2013 10:28 |
[Other] 2D hex mesh on multi element airfoil | Verfblikje | OpenFOAM Meshing & Mesh Conversion | 0 | January 19, 2012 11:55 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 04:52 |