|
[Sponsors] |
Convergence issues with NACA 0012 RANS Test Case |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 22, 2024, 05:46 |
Convergence issues with NACA 0012 RANS Test Case
|
#1 |
New Member
Tomas Perez Zapico
Join Date: Mar 2023
Posts: 11
Rep Power: 3 |
Hi,
I have been running the NACA 0012 RANS Test Case for different angles of attack for both the SST and SA turbulence models and with the 897x257 mesh available in the repository. With the SST model I have had no problems, but with SA for AoA>12 degrees the solution diverges after a few iterations. The only change I did in the configuration file was adding the WITHFT2 because the User's Guide recommends using it when using the NEGATIVE modification of the SA model. Does anyone know if there is something I could change in order for it to converge? Thanks in advance. |
|
April 25, 2024, 16:04 |
|
#2 |
Senior Member
bigfoot
Join Date: Dec 2011
Location: Netherlands
Posts: 521
Rep Power: 17 |
Could you maybe show how well it does compared to the validation results from NASA:
https://turbmodels.larc.nasa.gov/naca0012_val.html They use a very fine grid, and they report results up to a=15 |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SU2 NACA0012 Transitional flow simulation Convergence Issues | morgJ | SU2 | 0 | July 21, 2022 07:42 |
Some problems in naca 0012 V&V case of NASA TMR and DPW using OpenFOAM | chengdi | OpenFOAM Running, Solving & CFD | 7 | October 5, 2019 13:20 |
NACA 0012 k epsilon LRC - convergence problem | Bernoulli666 | OpenFOAM Running, Solving & CFD | 3 | May 15, 2017 09:01 |
How to run the naca 0012 V&V case of NASA TMR and DPW using OpenFOAM | chengdi | OpenFOAM Running, Solving & CFD | 0 | May 9, 2017 07:45 |
simpleFoam 2d Case RANS Issues | mosquera | OpenFOAM Running, Solving & CFD | 0 | July 1, 2013 07:23 |