Missing Variables in a Contour Group

Taiwo_Oni · August 4, 2014, 06:06

I used Fluent Data Loader to load a data file to Tecplot but discovered that some of the variables (e.g. velocity magnitude, radial velocity, total temperature, etc) that were exported and written from Fluent to Tecplot were missing in the Contour & Multi-Colouring Details in the Tecplot.
Can somebody please help me by letting me know how to make these variables not to be missing, i.e. to make them be part of the variables that will be available in the Contour & Multi-Colouring Details in the Tecplot.

everlasting704 · April 18, 2015, 22:49

I meet the similar problem,if you have solve the problem or have some conclusion,please give me a hand.Thanks in advance.

Ambalo · March 10, 2016, 10:21

I've got the same problem. If I export Fluent data and cas files using the "Data File Quantities..." Tecplot reading all "Standart Quantities" but not the "Additional Quantities".
So it would be great, if someone can help.

Thank you

chen_xmu · March 31, 2016, 07:45

The same problem occured when I export the Custom field function from Fluent to Tecplot. Finally, I solved it through the way to export the data of the single varible by Tecplot Formart. In tecplot, the name of the varible is "unkonw varible #......." .

August 4, 2014, 06:06	Missing Variables in a Contour Group	#1
Taiwo_Oni New Member Taiwo Join Date: Oct 2011 Location: UK Posts: 21 Rep Power: 14	I used Fluent Data Loader to load a data file to Tecplot but discovered that some of the variables (e.g. velocity magnitude, radial velocity, total temperature, etc) that were exported and written from Fluent to Tecplot were missing in the Contour & Multi-Colouring Details in the Tecplot. Can somebody please help me by letting me know how to make these variables not to be missing, i.e. to make them be part of the variables that will be available in the Contour & Multi-Colouring Details in the Tecplot.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mass flow in is not equal to mass flow out	saii	CFX	12	March 19, 2018 05:21
error message	cuteapathy	CFX	14	March 20, 2012 06:45
Constant velocity of the material	Sas	CFX	15	July 13, 2010 08:56
Are my IRIXbs systune parametersb setting correct	lakeat	OpenFOAM Installation	1	May 5, 2008 10:48
How to use q1 and ground file?	zheh	Phoenics	5	September 9, 2001 05:01

April 18, 2015, 22:49		#2
everlasting704 New Member 汪双君 Join Date: Apr 2014 Posts: 19 Rep Power: 12	I meet the similar problem,if you have solve the problem or have some conclusion,please give me a hand.Thanks in advance.

March 10, 2016, 10:21		#3
Ambalo New Member Sebastian Join Date: Mar 2016 Posts: 2 Rep Power: 0	I've got the same problem. If I export Fluent data and cas files using the "Data File Quantities..." Tecplot reading all "Standart Quantities" but not the "Additional Quantities". So it would be great, if someone can help. Thank you

March 31, 2016, 07:45		#4
chen_xmu New Member Join Date: Mar 2016 Location: China Posts: 3 Rep Power: 10	The same problem occured when I export the Custom field function from Fluent to Tecplot. Finally, I solved it through the way to export the data of the single varible by Tecplot Formart. In tecplot, the name of the varible is "unkonw varible #......." .