Value Blanking in Tecplot 360 EX 2014 R1

bharatesh · May 20, 2015, 06:32

Hi guys,
I have a 'Wing-Store-Pylon' model (PFA), for which i need to blank out the Store alone, i tried 'Value Blank', and it worked at least for the visual treat!!

. But when I Sliced at some particular region on the wing such that the slice plane passes through the Store, I was able to see the blanked part of the model..

Moreover, when I plotted the Cp plot for the sliced plane, the Cp plot was disturbed the the Store section. Attached the pictures.

Kindly someone tell me how to eliminate the blanked part completely and also to eliminate the disturbance from the Cp plot.

Thanks in advance!!

bharatesh · May 21, 2015, 00:41

Can somebody help me resolve this issue please??

Thanks in advance

bharatesh · May 29, 2015, 01:07

I solved the problem, there is a checkbox "Obey source zone blanking" in the "Slice Details" window, by enabling which you could easily avoid the blanked part of the 3d geometry..

sliverdragon · January 25, 2016, 15:30

Hi Bharatesh,
I'm working on a separation case too and I'm looking for a benchmark to validate my method. Your model seems the one widely used in papers, could you tell me how can I find this geometry?

Thanks

May 21, 2015, 00:41	Hello Tecplot experts and learners	#2
bharatesh New Member Bharatesh Join Date: Mar 2015 Posts: 26 Rep Power: 11	Can somebody help me resolve this issue please?? Thanks in advance

May 29, 2015, 01:07	Problem resolved!	#3
bharatesh New Member Bharatesh Join Date: Mar 2015 Posts: 26 Rep Power: 11	I solved the problem, there is a checkbox "Obey source zone blanking" in the "Slice Details" window, by enabling which you could easily avoid the blanked part of the 3d geometry..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Fourier Transform (FFT) in Tecplot 360	g.woyczynski	Tecplot	5	October 26, 2017 11:09
Tecplot 360 2011 R2 preview with OpenFOAM data loader available for evaluation	scott_rumage	OpenFOAM Post-Processing	50	January 23, 2017 02:49
Incorrect showing for the contour in Tecplot 360	bhbuaa	Tecplot	0	August 12, 2014 12:46
How to plot contour lines in Tecplot 360 using Excel file	Iqbal	Tecplot	1	May 30, 2012 19:22
CFX-Post and Tecplot 360	Rogerio Fernandes Brito	CFX	2	September 28, 2008 14:45

January 25, 2016, 15:30		#4
sliverdragon New Member Menglong Ding Join Date: Oct 2014 Posts: 1 Rep Power: 0	Hi Bharatesh, I'm working on a separation case too and I'm looking for a benchmark to validate my method. Your model seems the one widely used in papers, could you tell me how can I find this geometry? Thanks