CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home >

CFD Events Calendar, Passed Events

Application Area Filter:
Special Fields Filter:
Software Filter:
Sort by:
Type of Event Filter:
Location Filter:

Passed Event 1701 - 1800 of 2531, Sorted by Start Date:

November, 2006
  • Fluent's Fluid Mechanics and CFD Review Course
    Course, Fluent Inc., Lebanon, United States, November 29, 2006

    This two and a half-day course is intended for those users who are new to CFD and who need an introduction (or re- introduction) to fluid mechanics, heat transfer and computational fluid dynamics.

  • Fluent Webinar "Kraftwerkstechnik"
    Online Event, November 20, 2006

    Online-Seminar will be in German language

  • Introduction to Airpak Training by Fluent
    Course, Fluent Inc., Lebanon, United States, November 15, 2006

    The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.

  • 34th CFD - Higher Order Discretization Methods - ICCFD4
    Course, Chaussee de Waterloo 72, B-1640 Rhode-St-Genese, Belgium, November 14, 2006

    This course is part of the EUA4X project. Special funding is available for young researchers. Schemes with order of accuracy higher than two are becoming a hot topic in CFD, also in fields where they have not been used in the past, such as the simulation of compressible aerodynamical flows.

  • Aerospace Design Expo 2006
    Anaheim Convention Center, Anaheim, United States, November 14, 2006

    Aerospace Design Expo 2006 North America is an exciting NEW international trade show for aerospace design engineering, materials innovation and specialist development partners for the civil, military and space industries.

  • Introduction to FLUENT Training
    Course, Fluent Inc., Ann Arbor, United States, November 13, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to FLUENT Training
    Course, Fluent Inc., Lebanon, United States, November 13, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to Icepak Training by Fluent
    Course, Fluent Inc., Austin, United States, November 13, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • Hands-On Introduction to CFD Seminar
    Seminar, Morris County School of Technology, Denville, United States, November 13, 2006

    This course is a one-day seminar that will describe the fundamentals of computational fluid dynamics (CFD) theory and its applications, using hands-on workshop examples to illustrate the concepts of CFD.

  • EXPERIMENTAL AEROACOUSTICS - EWA
    Conference, von Karman Institute, Chaussee de Waterloo 72, 1640 Rhode-St-Genese, Belgium, November 13, 2006

    This lecture series is focused towards acoustic measurements in wind tunnels.

  • Advanced Thermal Modeling Course by Fluent
    Course, Santa Clara, United States, November 9, 2006

    This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.

  • European PHOENICS User Meeting
    User Conference, Cannizaro House, West Side, Wimbledon Common, SW19 4UE, London, United Kingdom, November 9, 2006

    Presentation of applications by European PHOENICS users. Presentation and demonstration by CHAM of latest PHOENICS features. Exchange of ideas, discussion forum, workshop programme.

  • Forum Fluent 2006 : l'evenement CFD
    User Conference, CAP 15 - 3, Quai de Grenelle, Paris 75015, France, November 9, 2006

    Venez decouvrir la strategie et l'offre du nouveau groupe ANSYS/Fluent, premier editeur mondial de Solutions de Simulation CAE, en assistant au Forum FLUENT 2006.

  • Hands-On Introduction to CFD Seminar
    Seminar, 1579 Straits Turnpike, Suite 2B, Middlebury, United States, November 9, 2006

    This course is a one-day seminar that will describe the fundamentals of computational fluid dynamics (CFD) theory and its applications, using hands-on workshop examples to illustrate the concepts of CFD.

  • Gridgen Standard Training Course
    Seminar, 213 South Jennings Avenue, Fort Worth, United States, November 7, 2006

    The Gridgen Standard Training Course includes three days covering both basic and advanced Gridgen usage. The most commonly used GUI commands and efficient tools for making grids quickly are thoroughly explained. The training course progresses to more advanced tools and how to work with difficult topologies and geometry models. Tutorials will demonstrate the topics discussed and allow attendees their own practice time with the newly learned tools.

  • Hands-On Introduction to CFD Seminar
    Seminar, Stony Brook University Center for Emerging Technologies, Great River, United States, November 7, 2006

    This course is a one-day seminar that will describe the fundamentals of computational fluid dynamics (CFD) theory and its applications, using hands-on workshop examples to illustrate the concepts of CFD.

  • Advanced Training in FLUENT
    Course, Fluent Inc., Lebanon, United States, November 6, 2006

    This course is intended for experienced users of FLUENT v6 who are interested in more in-depth instruction on specific topics. Users may sign up for one or more days of instruction. Courses will consist of both lecture and hands-on examples.

  • Introduction to Icepak Training by Fluent
    Course, Santa Clara, United States, November 6, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • Effective Use of CFD for In-flight Icing Certification
    Course, Barcelona Supercomputing Center, Barcelona, Spain, November 6, 2006

    The course illustrates the state-of-the-art in CFD icing simulations and links theory to applications through demonstrations and training. This course should be of value to all involved in in-flight icing and is structured to be of equal interest to icing codes users, ice detection and protection manufacturers, regulators, ACOs, DERs, aircraft manufacturers, and accident investigators.

  • Large Eddy Simulation (LES) of Transitional and Turbulent Flows
    Course, Cranfield University, Bedford, United Kingdom, November 6, 2006

    The 3-day intensive Short Course is intended to cover in detail a number of LES issues including: numerical methods; subgrid scale models; validation; analysis of results; relation of numerical dissipation and subgrid scale models; implicit and hybrid LES methods; effects of initial and boundary conditions; and implementation in structured and unstructured grids.

  • THERMO-HYDRAULIC INSTABILITIES
    Conference, von Karman Institute, Chaussee de Waterloo 72, 1640 Rhode-St-Genese, Belgium, November 6, 2006

    The purpose of the course is to provide state-of-the- art information on physical modelling, experimental and numerical simulation of thermohydraulic instability phenomena.

  • Advanced Thermal Modeling Course by Fluent
    Course, Fluent Inc., Lebanon, United States, November 2, 2006

    This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.

October, 2006
  • Introduction to FLUENT Training
    Course, Fluent Inc., Lebanon, United States, October 30, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to Icepak Training by Fluent
    Course, Fluent Inc., Lebanon, United States, October 30, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • 6th MIRA International Vehicle Aerodynamics Conference
    Conference, Heritage Motor Centre, Gaydon, United Kingdom, October 25, 2006

    Optimising vehicle aerodynamic design for real-world driving conditions remains the prime objective of vehicle aerodynamicists. This applies whether the vehicle is an F1 racing car or a lightweight ultra fuel-efficient new concept. Striving towards this objective continues to drive the level of sophistication in wind tunnel design and simulation techniques to new heights.

  • Workshop "Optimiertes Produktdesign"
    Workshop, Darmstadt, Germany, October 24, 2006

    Unser Workshop stellt Methoden der systematischen und automatischen Optimierung im Zusammenhang mit der Stroemungssimulation vor. Neben den Moeglichkeiten der Optimierung mit CFD-Produkten aus dem Hause ANSYS/Fluent erhalten Sie Informationen ueber die Optimierungs-Loesungen der Firmen Altair Engineering, dynardo und ESTECO. Der Workshop ist kostenfrei.

  • Introduction to FLUENT Training
    Course, Fluent Inc., Ann Arbor, United States, October 23, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • COMSOL Users Conferences 2006
    Conference, United States, October 22, 2006

    Two conferences in the US--along with 14 others throughout the world--combine hands-on training along with presentations from users and COMSOL technical staff. Attendees will learn about the latest COMSOL products, discover the expanding range of applications possible with COMSOL Multiphysics, while making contacts and getting hands-on training.

  • Introductory EnSight Training
    Course, La Quinta Inn, Morrisville, United States, October 19, 2006

    This course will give an overview of EnSight capabilities and cover most of its basic features. It is assumed that attendees have little prior experience with EnSight. This is a hands-on course. Concepts will be taught through the course notes, demonstrations by the instructor, and by using EnSight to complete a number of exercises.

  • SIMPETRO
    Workshop, PDVSA - INTEVEP, Los Teques, Venezuela, October 19, 2006

    PDVSA INTEVEP and ESSS invites you to the 1st Venezuelan Workshop on Computational Simulation applied to the Oil & Gas industry (SIMPETRO).

  • Introduction to Airpak Training by Fluent
    Course, Fluent Inc., Lebanon, United States, October 18, 2006

    The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.

  • Paraview Workshop
    Chalmers Konferens Center, Gothenburg, Sweden, October 17, 2006

    High Performance visualization with Paraview.

  • Advanced EnSight Training
    Course, La Quinta Inn, Morrisville, United States, October 17, 2006

    The advanced training course is a hands-on class that focuses on sophisticated features and options in EnSight, especially those related to animation. Either prior attendance in an introductory class or significant practical experience with EnSight is a prerequisite.

  • Simulation and Data Intensive Fair 2006
    Conference, Chalmers Conference Center, Gothenburg, Sweden, October 17, 2006

    Nordic Fair/Conference for Scientific and Technical Simulation.

  • UK Simulation Conference
    Conference, Stanton House Hotel, Stanton Fitzwarren, United Kingdom, October 17, 2006

    The conference will be a great opportunity to learn about the latest visualisation features in EnSight, get a preview of future developments, and network with other visualisation experts. Speakers from a wide range of simulation companies will deliver papers on their research and how they use EnSight. You will also have the chance to talk with the developers of Harpoon and discuss the latest features and future development plans.

  • Introduction to FLUENT Training
    Course, Fluent Inc., Lebanon, United States, October 16, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to POLYFLOW Training by Fluent
    Course, Fluent Inc., Lebanon, United States, October 16, 2006

    This course is intended for people who have had little or no experience using POLYFLOW. New users of the software should register for the four-day training course.

  • FLUISTCOM Workshop: URANS Methods to Predict Fluctuating Heat Transfer
    Workshop, DLR Institut of Combustion Technology, 38-40 Pfaffenwaldring, D - 70569 Stuttgart - Vaihingen (University Campus), Germany, October 16, 2006

    URANS (Unsteady Reynolds Averaged Navier Stokes) methods to predict fluctuating wall heat transfer in combustion chambers for clean combustion systems and oscillating heat transfer on turbine blades. A workshop in the frame of FLUISTCOM - Fluid-Structure Interaction for Combustion Systems, European Marie Curie Research Training Network: towards improved understanding of transient combustion and its coupling with combustion wall vibration and thermal wall load.

  • 12th ERCOFTAC Workshop on Refined Turbulence Modelling
    Workshop, Institute for Fluid Mechanics, Technical University of Berlin, Berlin, Germany, October 12, 2006

    The Workshops on Refined Turbulence Modelling aim to bring together scientists, researchers, users and developers from industry and from the academic field. Similar to the previous workshops in Lyon (1992,1993), Lisabon (1994), Karlsruhe (1995), Chatou/Paris(1996), Delft (1997), Manchester (1998), Helsinki (1999), Darmstadt (2001), Poitiers (2002) and Gothenburg (2005), some fundamental phenomena, but also some industrially relevant problems have been chosen as test cases for this workshop.

  • Fluent-Workshop "Rapid Flow Modeling fuer den Design-Experten"
    Workshop, Hannover, Germany, October 12, 2006

    Fluent laedt ein: Erleben Sie die einfache Handhabung und die Funktionsfuelle unserer neuen Software FloWizard live.

  • Advanced Training in FLUENT
    Course, Houston, United States, October 11, 2006

    This course is intended for experienced users of FLUENT v6 who are interested in more in-depth instruction on specific topics. Users may sign up for one or more days of instruction. Courses will consist of both lecture and hands-on examples.

  • Fluent-Workshop "Rapid Flow Modeling fuer den Design-Experten"
    Workshop, Hamburg, Germany, October 11, 2006

    Fluent laedt ein: Erleben Sie die einfache Handhabung und die Funktionsfuelle unserer neuen Software FloWizard live.

  • Fluent-Workshop "Metallurgie"
    Workshop, Darmstadt, Germany, October 10, 2006

    Fluent laedt ein: Einsatzmoeglichkeiten und Nutzen von CFD in der Metallurgie.

  • Modeling and Measurements of Two-Phase Flows and Heat Transfer in Nuclear Fuel Assemblies
    Workshop, Roslagstullsbacken 21, Stockholm, Sweden, October 10, 2006

    The purpose of the Workshop is to provide a platform for presentation of the current state-of-the-art in the field of two-phase flows and heat transfer in nuclear fuel assemblies. Both experimental and numerical research and development will be included

  • Fluent-Workshop "Rapid Flow Modeling fuer den Design-Experten"
    Workshop, Berlin, Germany, October 10, 2006

    Fluent laedt ein: Erleben Sie die einfache Handhabung und die Funktionsfuelle unserer neuen Software FloWizard live.

  • Introduction to FLUENT Training
    Course, Houston, United States, October 9, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to Icepak Training by Fluent
    Course, Santa Clara, United States, October 9, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • Fluent Webinar "Einsatzmoeglichkeiten und Nutzen von CFD in der Umwelttechnik"
    Online Event, October 9, 2006

    Online-Seminar will be in German language

  • 8th Overset Composite Grid and Solution Technology Symposium
    Conference, NASA Johnson Space Center, Houston, United States, October 3, 2006

    This international symposium provides an open communication forum for mathematicians, scientists, and engineers from academia, industry, and government in the field of overset grid CFD.

  • Introduction to FLUENT Training
    Course, Fluent Inc., Lebanon, United States, October 2, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

September, 2006
  • PLM Road Map 2006
    Conference, The Dearborn Inn, Dearborn, United States, September 27, 2006

    Annual PLM Road Map conference focusing on thought leadership in design and engineering. Join leading-edge users, top vendor architects, and leading industry analysts as they discuss their experiences in addressing strategic PLM topics.

  • Fluent-Workshop "Rapid Flow Modeling fuer den Design-Experten"
    Workshop, Salzburg, Austria, September 27, 2006

    Fluent laedt ein: Erleben Sie die einfache Handhabung und die Funktionsfuelle unserer neuen Software FloWizard live.

  • Fluent-Workshop "Rapid Flow Modeling fuer den Design-Experten"
    Workshop, Graz, Austria, September 26, 2006

    Fluent laedt ein: Erleben Sie die einfache Handhabung und die Funktionsfuelle unserer neuen Software FloWizard live.

  • 5th International Symposium on Turbulence, Heat and Mass Transfer
    Conference, Hotel Palace, Dubrovnik, Croatia, September 25, 2006

    The 5th THMT symposium will provide an opportunity to present recent advances and to discusss current problems, future needs and prospects in the area of heat and mass transfer associated with turbulence.

  • Introduction to FLUENT Training
    Course, Santa Clara, United States, September 25, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Fluent-Workshop "Rapid Flow Modeling fuer den Design-Experten"
    Workshop, Wien, Austria, September 25, 2006

    Fluent laedt ein: Erleben Sie die einfache Handhabung und die Funktionsfuelle unserer neuen Software FloWizard live.

  • SONIC 06 - National Level Symposium on CFD
    Conference, Pune, India, September 22, 2006

    INTERNATIONAL INSTITUTE OF INFORMATION TECHNOLOGY in association with FLUENT INDIA (www.fluent.co.in), the worlds leading supplier of computational fluid dynamics (CFD) software and services presents SONIC 06, Symposium On Novel Ideas in CFD, a proposed National Level Symposium on Computational Fluid Dynamics.

  • Advanced Thermal Modeling Course by Fluent
    Course, Fluent Inc., Austin, United States, September 21, 2006

    This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.

  • Fluent Webinar "Rapid Flow Modeling: CFD-Power fuer den Design-Experten"
    Online Event, September 21, 2006

    !New Product! Online-Seminar will be in German language

  • Introduction to Airpak Training by Fluent
    Course, Fluent Inc., Lebanon, United States, September 20, 2006

    The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.

  • Fluent-Workshop "Umwelttechnik"
    Workshop, Darmstadt, Germany, September 20, 2006

    Fluent laedt ein: Einsatzmoeglichkeiten und Nutzen von CFD in der Umwelttechnik.

  • Numerische Berechnung turbulenter Stroemungen in Forschung und Praxis
    Course, Universitaet Karlsruhe (TH), Karlsruhe, Germany, September 20, 2006

    Der Kurs stellt unterschiedliche Ansaetze und Methoden zur Berechnung turbulenter Stroemungen vor. Ausgehend von den physikalischen Eigenschaften solcher Stroemungen werden zahlreiche Varianten statistischer Modelle diskutiert (k- epsilon, k-omega, SST, RSM, EASM, ... ), sowie zeitlaufloesende Verfahren ( DNS, LES, DES, URANS, ... ). Implementierungsaspekte werden besprochen. Vor- und Nachteile der Modelle an zahlreichen Beispielen illustriert.

  • Fluent-Workshop "Rapid Flow Modeling fuer den Design-Experten"
    Workshop, Darmstadt, Germany, September 19, 2006

    Fluent laedt ein: Erleben Sie die einfache Handhabung und die Funktionsfuelle unserer neuen Software FloWizard live.

  • Live Demonstration of EFD Software - All Welcome
    Online Event, September 19, 2006

    This will be a 30-minute live online demonstration of the latest CAD-integrated EFD software from Flomerics

  • Introduction to FLUENT Training
    Course, Fluent Inc., Ann Arbor, United States, September 18, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to FLUENT Training
    Course, Fluent Inc., Lebanon, United States, September 18, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to Icepak Training by Fluent
    Course, Fluent Inc., Austin, United States, September 18, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • Fluent Webinar "Kraftwerkstechnik"
    Online Event, September 18, 2006

    Online-Seminar will be in German language

  • Godunov Methods in Computational Engineering and Technology, by Prof. E.F. Toro OBE
    Course, Centre for Mathematical Sciences, Cambridge, United Kingdom, September 18, 2006

    The course is about a broad class of advanced numerical methods for solving partial differential equations that model a variety of physical/chemical processes of interest to industry, academia and research organizations. The emphasis is on basic concepts and the foundations required for algorithm design, code development and practical applications.

  • CFD ACE+ and CFD FASTRAN Training
    Workshop, 100 Ft. Ring Road, 3rd Phase, 6th Block,BSK III stage, Bangalore-560085, India, September 18, 2006

    ESI INDIA is conducting a five-day training course on Multi- physics Modeling using CFD codes; CFD-ACE+ and CFD-FASTRAN.

  • Numerical Analysis of Flow Phenomena
    Conference, Hotel Belvedere Imperial, Hersonnisos, Crete, Greece, September 15, 2006

    International Conference of Numerical Analysis and Applied Mathematics 2006. During the conference the following session will be organized: Numerical analysis of flow phenomena

  • Fluent-Workshop "Rapid Flow Modeling fuer den Design-Experten"
    Workshop, Duesseldorf, Germany, September 14, 2006

    Fluent laedt ein: Erleben Sie die einfache Handhabung und die Funktionsfuelle unserer neuen Software FloWizard live.

  • TGrid 4.0 Advanced Training
    Course, Fluent Inc., Ann Arbor, United States, September 13, 2006

    Fluent is offering an advanced TGrid 4.0 course for general TGrid users who are interested in meshing complicated geometry. The program will have an automotive focus, however, it is open to all TGrid clients. Attendees must have completed TGrid introductory training and it is recommended that they have at least one year of experience using the software.

  • Introduction to FLUENT Training
    Course, Fluent Inc., Chicago, United States, September 11, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to Icepak Training by Fluent
    Course, Santa Clara, United States, September 11, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • 2006 Fluent US Automotive CFD Summit
    User Conference, Hyatt Regency Dearborn, Dearborn, United States, September 11, 2006

    Attendees tell us year after year that the CFD Summit is the one event all year they rely upon to get the latest information about new technology developments in computational fluid dynamics and what lies ahead in the years to come. This year's program will be no exception

  • Fluent Webinar "Einsatzmoeglichkeiten und Nutzen von CFD in der Gebaeudetechnik"
    Online Event, September 11, 2006

    Online-Seminar will be in German language

  • Fluent Webinar "EDV-gestuetzte Brandsimulation mit CFD"
    Online Event, September 11, 2006

    Online-Seminar will be in German language

  • Introduction to FLUENT Training
    Course, Seattle, United States, September 9, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • ECCOMAS CFD 2006
    Conference, Egmond aan Zee, Netherlands, September 5, 2006

    The next in the bi-annual series of conferences on CFD, organized by ECCOMAS (The European Community on Computational Methods in Applied Sciences and Engineering)

  • 3rd Symposium on Advanced Turbulence Modeling for Industrial CFD
    Conference, Hotel Hilton Belem, Belem, Brazil, September 3, 2006

    The purpose of this symposium is to bring together researchers in the field of Turbulence Modeling to evaluate recent progresses, anticipate future modeling requirements and preview future research directions. Emphasis will be given to applications and solution of Industrial Problems. Authors are invited to participate in this event to expand international cooperation, understanding and dissemination of recent advances in the general area of Turbulence Modeling.

August, 2006
  • Introduction to FLUENT Training
    Course, Fluent Inc., Lebanon, United States, August 21, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to Icepak Training by Fluent
    Course, Fluent Inc., Lebanon, United States, August 21, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • Numerical Methods in Fluid Dynamics
    Conference, Greece, August 21, 2006

    Aim of Special Session is the discussion of Numerical Methods in Fluid Dynamics. We plan to discuss spectral, finite-difference, finite-volume and others methods in this area. Special numerical methods for flows with complex geometry and flows with hydrodynamic instabilities are especially welcome.

  • CFD OIL 2006
    Conference, Rio de Janeiro, Brazil, August 15, 2006

    2nd Latin American CFD Workshop for the Oil Industry

  • Introduction to FLUENT Training
    Course, Fluent Inc., Ann Arbor, United States, August 14, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • IHTC-13, 13th International Heat Transfer Conference
    Conference, Sydney, Australia, August 13, 2006

    Covers both fundamental and applied topics in heat transfer.

  • Advanced Thermal Modeling Course by Fluent
    Course, Santa Clara, United States, August 10, 2006

    This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.

  • Introduction to Airpak Training by Fluent
    Course, Fluent Inc., Lebanon, United States, August 9, 2006

    The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.

  • Training Program in Computational electromagnetism and calculation of RADAR cross section
    Workshop, Centre for Development of Advanced Computing Knowledge Park, Bangalore, India, August 8, 2006

    Zeus Numerix, Mumbai and CDAC, Pune are jointly organising a workshop on "Computational Electromagnetism and Calculation of Radar Cross Section". The prime focus of the workshop would be to train scientists and engineers in solving problems through several case studies. Fundamental of CEM will be covered by IIT Bombay Faculty, Application part will be covered by Zeus Numerix Faculty and High Performance Computing by CDAC Faculty.

  • Introduction to FLUENT Training
    Course, Fluent Inc., Lebanon, United States, August 7, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to Icepak Training by Fluent
    Course, Santa Clara, United States, August 7, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • TGrid 4.0 Advanced Training
    Course, Fluent Inc., Ann Arbor, United States, August 7, 2006

    Fluent is offering an advanced TGrid 4.0 course for general TGrid users who are interested in meshing complicated geometry. The program will have an automotive focus, however, it is open to all TGrid clients. Attendees must have completed TGrid introductory training and it is recommended that they have at least one year of experience using the software.

  • Solving Dynamic Mesh Problems with FLUENT V6
    Course, Fluent Inc., Ann Arbor, United States, August 3, 2006

    This training course, offered in Fluent's Ann Arbor office, is designed for existing users of FLUENT.

  • Fluent's Fluid Mechanics and CFD Review Course
    Course, Fluent Inc., Lebanon, United States, August 2, 2006

    This two and a half-day course is intended for those users who are new to CFD and who need an introduction (or re- introduction) to fluid mechanics, heat transfer and computational fluid dynamics.

  • Tcl/Tk/Glyph Class
    Seminar, 213 South Jennings Avenue, Fort Worth, United States, August 2, 2006

    The Tcl/Tk/Glyph Training Course is a new 3-day session that covers Tcl, the underlying programming basis of Gridgen Glyph, and Tk, Tcl's graphical toolkit for building GUI panels, within the framework of Gridgen Glyph, Gridgen's scripting language. Taught by a well-known Tcl/Tk programming expert and author, this course combines lectures with interactive examples and hands-on problems.

  • Diploma in Advanced CFD Analysis - DACFD
    Course, 3, Anjali Apartment, 768/12, Bhandarkar Road, Deccan, Pune, India, August 1, 2006

    CCTech has launched six months training course in CFD Analysis starting from August 2006. Course is structured to cater to industrial requirements.

July, 2006
  • Introduction to FLUENT Training
    Course, Fluent Inc., Lebanon, United States, July 24, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Advanced Training in FLUENT
    Course, Fluent Inc., Lebanon, United States, July 17, 2006

    This course is intended for experienced users of FLUENT v6 who are interested in more in-depth instruction on specific topics. Users may sign up for one or more days of instruction. Courses will consist of both lecture and hands-on examples.

  • Introduction to Icepak Training by Fluent
    Course, Fluent Inc., Austin, United States, July 17, 2006

    New users of Icepak software should register for the three- day introductory training course.

Pages:

Prev    1    2    3    4    5    6    7    8    9    10    11    12    13    14    15    16    17    18    19    20    21    22    23    24    25    26    Next   

[Back to Events Calendar Front Page]