Volume elimination

nkjsimulating · October 29, 2013, 07:36

Hello ANSA users,
I need clarification related to H-blocking . I have two separate boxes which are not connected to each other like …
Is there any command to connect the control points ? Or can we generate volume 2 with volume-1 ?
Please suggest your ideas..

thnks

vangelis · October 29, 2013, 17:58

Hi there,

No you cannot work with two independent volumes
Delete Volume 2
and then split Volume 1 into 9 sub-blocks
the inner sub-block should then be fitted to the blade
and take the shape of Volume 2.
Then all will be connected. You will also have to
delete the inner box in the end as it should not be meshed

hope this helps

Vangelis

nkjsimulating · October 30, 2013, 01:56

Hi Vangelis,

Thanks for your clarification.
can you just help me with the inner sub block ?

vangelis · October 30, 2013, 12:31

I mean something like the attached image.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] mesh airfoil NACA0012	anand_30	OpenFOAM Meshing & Mesh Conversion	13	March 7, 2022 18:22
how to set periodic boundary conditions	Ganesh	FLUENT	15	November 18, 2020 07:09
Problem of simulating of small droplet with radius of 2mm	liguifan	OpenFOAM Running, Solving & CFD	5	June 3, 2014 03:53
On the damBreak4phaseFine cases	paean	OpenFOAM Running, Solving & CFD	0	November 14, 2008 22:14
[blockMesh] Axisymmetrical mesh	Rasmus Gjesing (Gjesing)	OpenFOAM Meshing & Mesh Conversion	10	April 2, 2007 15:00

October 29, 2013, 17:58		#2
vangelis Senior Member Vangelis Skaperdas Join Date: Mar 2009 Location: Thessaloniki, Greece Posts: 287 Rep Power: 22	Hi there, No you cannot work with two independent volumes Delete Volume 2 and then split Volume 1 into 9 sub-blocks the inner sub-block should then be fitted to the blade and take the shape of Volume 2. Then all will be connected. You will also have to delete the inner box in the end as it should not be meshed hope this helps Vangelis

October 30, 2013, 01:56		#3
nkjsimulating New Member Niraj Join Date: Jul 2013 Location: Germany Posts: 15 Rep Power: 13	Hi Vangelis, Thanks for your clarification. can you just help me with the inner sub block ?