[ANSA v17] CONS not shown everytime I change model view

tammttg · September 29, 2017, 03:13

Hi all,
I started using ANSA v17.1.1 today, and I met this issue.
All CONS (single, double, triple) disappear when I move my model.
I have to toggle Perims and Perims Point on FACES DRAW to make them visible, until the model is moved again. It is so annoying

I'm using Intel HD graphics card. Is that the reason

I looked around and found that HW2017 also gets issue with the Intel card.
Could you give me some suggestion.
Thank you

xava · May 21, 2018, 09:00

Hi tammttg, did you already managed to find a solution to this issue? I am experiencing the same problem (on win10, i5-6600, intel graphics hd530, ANSA v17.1.4).

tammttg · May 21, 2018, 09:06

Hi xava,
I still have no solution for this.
Using another version could help (v15, v18, etc.)

Best.

khanhrovip · June 2, 2018, 13:32

Quote:

Originally Posted by tammttg

Hi xava,
I still have no solution for this.
Using another version could help (v15, v18, etc.)

Best.

I have same problem. I using v18.1

vangelis · June 8, 2018, 04:04

Please check your graphics card driver and ensure it is the latest.
If not please upgrade to the latest.

You can check this from ANSA>Help>About ANSA

and then check on the internet the latest driver to compare.

shach934 · May 6, 2019, 18:07

This happened to me too. I am using HD630 graphic card and 19.1.2. I have updated the driver to date. Any suggestion to solve this problem? Thanks.

Mahmoud_aboukhedr · June 14, 2019, 11:05

Hello all,

Sometimes this happens due to graphics card problems;
To resolve the problem one can try the following:
- when you start ANSA, at the first window, One can find [Additional ANSA command arguments] --- > in the space below write:
-performance_mode <3>

In most of the cases, this solves the problem.

Best,

September 29, 2017, 03:13	[ANSA v17] CONS not shown everytime I change model view	#1
tammttg New Member Tam Nguyen Join Date: Sep 2017 Posts: 4 Rep Power: 7	Hi all, I started using ANSA v17.1.1 today, and I met this issue. All CONS (single, double, triple) disappear when I move my model. I have to toggle Perims and Perims Point on FACES DRAW to make them visible, until the model is moved again. It is so annoying I'm using Intel HD graphics card. Is that the reason I looked around and found that HW2017 also gets issue with the Intel card. Could you give me some suggestion. Thank you

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thermal phase change model	Piti	CFX	1	January 14, 2021 11:03
Superlinear speedup in OpenFOAM 13	msrinath80	OpenFOAM Running, Solving & CFD	18	March 3, 2015 06:36
change 3D model to 2D	Alipius	ANSYS	0	July 21, 2009 06:19
Model foaming process: change the volume / density	pmp77	CFX	0	November 18, 2008 10:53
How to model the solid-fluid phase change in CFX	ohrmond	CFX	2	May 26, 2006 07:27

May 21, 2018, 09:00		#2
xava New Member Xavation Join Date: Dec 2016 Posts: 9 Rep Power: 8	Hi tammttg, did you already managed to find a solution to this issue? I am experiencing the same problem (on win10, i5-6600, intel graphics hd530, ANSA v17.1.4).

May 21, 2018, 09:06		#3
tammttg New Member Tam Nguyen Join Date: Sep 2017 Posts: 4 Rep Power: 7	Hi xava, I still have no solution for this. Using another version could help (v15, v18, etc.) Best.

June 8, 2018, 04:04		#5
vangelis Senior Member Vangelis Skaperdas Join Date: Mar 2009 Location: Thessaloniki, Greece Posts: 286 Rep Power: 19	Please check your graphics card driver and ensure it is the latest. If not please upgrade to the latest. You can check this from ANSA>Help>About ANSA and then check on the internet the latest driver to compare.

May 6, 2019, 18:07		#6
shach934 New Member shach Join Date: Apr 2019 Posts: 26 Rep Power: 5	This happened to me too. I am using HD630 graphic card and 19.1.2. I have updated the driver to date. Any suggestion to solve this problem? Thanks.

June 14, 2019, 11:05		#7
Mahmoud_aboukhedr Member Mahmoud Aboukhedr Join Date: Feb 2014 Location: London Posts: 40 Rep Power: 10	Hello all, Sometimes this happens due to graphics card problems; To resolve the problem one can try the following: - when you start ANSA, at the first window, One can find [Additional ANSA command arguments] --- > in the space below write: -performance_mode <3> In most of the cases, this solves the problem. Best,