|
[Sponsors] |
|
June 9, 2012, 10:46 |
2d mesh problem
|
#1 |
New Member
tl
Join Date: May 2012
Posts: 12
Rep Power: 14 |
Hello all,
I am trying to set up piston motion with a bowl in Fluent. The 2d geometry consists of three parts-piston bowl,piston motion,squish space. These three parts are created in UG, then assembled together. I imported the assemble file into Ansys Meshing Tool. However, There is a wall missing in fluent between piston bowl and piston motion after meshing. Fluent created a wall between squish space and piston motion automatically. Anyone knows how to let fluent create the wall for boundary condition purpose between piston bowl and piston motion? Any reply would be appreciated. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dynamic Mesh Problem. | Tom Clark | FLUENT | 10 | June 21, 2021 04:27 |
Gambit problems | Althea | FLUENT | 22 | January 4, 2017 03:19 |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
Convergence problem when ustructured mesh is used. | SangJin Ryu | Siemens | 3 | October 5, 2000 20:26 |
Mesh | Mignard | FLUENT | 2 | March 22, 2000 05:12 |