[ICEM] How to generate unstructure mesh of this geometry?

llrr · May 14, 2013, 05:35

Hi Everyone, I would like to generate hybrid mesh using ICEM. The structure mesh will be genrated in the building, which has been cut off from the geometry in attachment. Then I would like to generate the unstructure mesh in this geometry in ICEM. I have never use ICEM to generate unstructure mesh. I tried many times but it still not succeed. Thank you for the help in advance.

Li

diamondx · May 14, 2013, 21:34

would you mind having a look at the link in my signature, it's a small introductory guide in ICEM

llrr · May 21, 2013, 04:18

Quote:

Originally Posted by diamondx

would you mind having a look at the link in my signature, it's a small introductory guide in ICEM

Hi diamondx, I have read the documents. Because there is a very small gap, I always failed to generate the mesh there. Thank you.

vimaero · May 23, 2013, 02:12

Hi Li

I am using GridPro. It can create good quality mesh even in small regions. I can help you with this case if i get the geometry. Can you post the geometry in IGES or STL format?

diamondx · May 23, 2013, 11:00

the tin file does not work, can you share the hole project ?

llrr · May 28, 2013, 04:41

Quote:

Originally Posted by diamondx

the tin file does not work, can you share the hole project ?

Hi Diamondx,

Here is the project files.

Thank you.

llrr · May 28, 2013, 04:42

Quote:

Originally Posted by vimaero

Hi Li

I am using GridPro. It can create good quality mesh even in small regions. I can help you with this case if i get the geometry. Can you post the geometry in IGES or STL format?

Hi Vimaero, I do not have the access to GridPro software. Thank you for the help and information.

Li

May 14, 2013, 21:34		#2
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 30	would you mind having a look at the link in my signature, it's a small introductory guide in ICEM __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

May 23, 2013, 11:00		#5
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 30	the tin file does not work, can you share the hole project ? __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 07:20
[snappyHexMesh] Layers:problem with curvature	giulio.topazio	OpenFOAM Meshing & Mesh Conversion	10	August 22, 2012 10:03
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 22:11
[snappyHexMesh] Irregular mesh generation for simple box geometry	ajl42	OpenFOAM Meshing & Mesh Conversion	0	March 7, 2011 18:04
unstructured vs. structured grids	Frank Muldoon	Main CFD Forum	1	January 5, 1999 11:09

May 23, 2013, 02:12		#4
vimaero New Member Vimalraj Join Date: Apr 2013 Location: Bangalore Posts: 29 Rep Power: 14	Hi Li I am using GridPro. It can create good quality mesh even in small regions. I can help you with this case if i get the geometry. Can you post the geometry in IGES or STL format?