|
[Sponsors] |
June 6, 2013, 02:59 |
Parametric on UG and ICEM
|
#1 |
New Member
leo
Join Date: Oct 2012
Posts: 1
Rep Power: 0 |
I just want to set up the geometry model in UG by parametric, then input it into ICEM to be meshing.
Could I modify the parameter from UG for geometry, meanwhile the meshing can be changed in ICEM? Do the process need to be done in workbench or just from UG to ICEM? Thanks! |
|
|
|