CFD Online Logo CFD Online URL
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] temperature limited in some cells

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   August 31, 2013, 04:39
Default temperature limited in some cells
Join Date: Oct 2012
Posts: 54
Rep Power: 7
dinesh is on a distinguished road
I am getting temperature limited to 1 in some 100 cellls and temperature limited to 5000 in some ... cells. Can anybody see my mesh file and help me how to improve the mesh quality ( other than what we do using improve-improve quality in fluent) can we localised improve the mesh in Fluent.
Plz see the link of my case file
dinesh is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
TEMPERATURE LIMITED problem emanuele FLUENT 7 January 16, 2013 21:39
Too low temperature at combustor outlet romekr FLUENT 2 February 6, 2012 11:02
Import netgen mesh to OpenFOAM hsieh Open Source Meshers: Gmsh, Netgen, CGNS, ... 32 September 13, 2011 05:50
Absolute Pressure and temperature limited to...... Shamoon FLUENT 1 August 31, 2007 15:09
Temperature, Pressure Limited + numerical error Michael P Main CFD Forum 4 August 3, 2007 12:00

All times are GMT -4. The time now is 03:54.