|October 21, 2013, 08:00||
Periodic problems unstructured mesh
Join Date: Oct 2013
Posts: 1Rep Power: 0
Hi everybody I'm Domenico Strippoli a student of Politecnico di Bari. The objective of my work is to analize the characterization of the flow across a finned tube of HRSG using the software ANSYS ICEM CFD.
I realized the geometry in CATIA V5 e then imported in ICEM. An important condition of this study is that the flow must respect the condition of traslational periodicity.
The domain is reported in figure 1 and is divided in 3 zones: in the first and the third zone I realize a structured mesh while in the third region is necessary an unstructured mesh (figure 2).
I found many difficulties to realize the unstructured region because while I check the mesh, there are periodic problems, even if, I imposed the translational periodicity between the PARTS “SUP NON STRUTT” e “INF NON STRUTT” (figure 3-4-5).
I hope that the figures are clear and make me some suggestions to solve this problem.
Many thanks, Domenico
|Thread||Thread Starter||Forum||Replies||Last Post|
|Moving mesh||Niklas Wikstrom (Wikstrom)||OpenFOAM Running, Solving & CFD||122||June 15, 2014 06:20|
|[ICEM] Generating Mesh for STL Car in Windtunnel Simulation||tommymoose||ANSYS Meshing & Geometry||48||April 15, 2013 04:24|
|snappyHexMesh won't work - zeros everywhere!||sc298||OpenFOAM Native Meshers: snappyHexMesh and Others||2||March 27, 2011 21:11|
|Convergence moving mesh||lr103476||OpenFOAM Running, Solving & CFD||30||November 19, 2007 15:09|
|unstructured vs. structured grids||Frank Muldoon||Main CFD Forum||1||January 5, 1999 11:09|