[ICEM] Need help with a blocking strategy

allendoss79 · January 30, 2014, 07:28

Hello all,

I need help meshing a geometry containing a rotor and 2 stator blades.
I've just started learning ICEM.Finding it difficult to mesh the same.Any help would be appreciated.

https://dl.dropboxusercontent.com/u/...M/Untitled.png

diamondx · January 30, 2014, 09:19

the tips are too thin you should expect bad elements with hexa !

mezah · February 2, 2014, 14:29

Hello,

Using unstructured mesh will be easy and fast, and i can help you with it.

allendoss79 · February 3, 2014, 07:46

Quote:

Originally Posted by mezah

Hello,

Using unstructured mesh will be easy and fast, and i can help you with it.

Hey mezah that would be good, as hexa meshing is bit hard...How do I go abt unstructured mesh? Please help
Thanks

January 30, 2014, 07:28	Need help with a blocking strategy	#1
allendoss79 New Member Allen Doss Join Date: Apr 2013 Posts: 10 Rep Power: 13	Hello all, I need help meshing a geometry containing a rotor and 2 stator blades. I've just started learning ICEM.Finding it difficult to mesh the same.Any help would be appreciated. https://dl.dropboxusercontent.com/u/...M/Untitled.png

January 30, 2014, 09:19		#2
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 28	the tips are too thin you should expect bad elements with hexa ! __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] o grid blocking strategy?	icemaniac178	ANSYS Meshing & Geometry	14	March 19, 2013 23:18
[ANSYS Meshing] Blocking and Meshing Strategy for an open flow domain over backward facing ramp	Crank-Shaft	ANSYS Meshing & Geometry	0	January 11, 2013 05:48
[ICEM] Blocking Strategy for Intersecting Tapered Cylinders	scribby182	ANSYS Meshing & Geometry	2	December 17, 2012 10:02
[ICEM] Blocking strategy for inclined plate	cbisw	ANSYS Meshing & Geometry	3	May 27, 2011 08:17
[ICEM] Blocking strategy	BrolY	ANSYS Meshing & Geometry	0	July 22, 2010 04:46

February 2, 2014, 14:29		#3
mezah New Member Hazem Join Date: Jan 2013 Posts: 23 Rep Power: 13	Hello, Using unstructured mesh will be easy and fast, and i can help you with it.