|
[Sponsors] |
[ICEM] What is the criteria for creating domain in ICEM |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 3, 2014, 03:07 |
What is the criteria for creating domain in ICEM
|
#1 |
New Member
Ganesh
Join Date: Jan 2014
Location: India
Posts: 2
Rep Power: 0 |
Dear friends,
I have a geometry, for that geometry i need to create a working domain for simulation. It is an external flow study. Am confused with the creation of working domain that is What should be the volume of my working domain where the fluid will flow. Suppose if am studying flow through a circular rod then what must be the dimension of domain volume. Here i need rectangular domain rather cylindrical domain. Is there any criterion like 2 or 3 times chord length or mean length. pls help me out guys. regarding length, Breadth & Width taking criteria. |
|
March 7, 2014, 09:52 |
|
#2 |
Senior Member
|
Dear colleguae I have read about 10 times the diameter and 50 times the length in terms of the diameter.... hope this help you!
|
|
March 11, 2014, 06:50 |
|
#3 |
New Member
Ganesh
Join Date: Jan 2014
Location: India
Posts: 2
Rep Power: 0 |
Thank you for your valuable reply What must be the relationship criterion between inlet, Far filed & Outlet. i.e, 3times the chord length at the inlet, 5times the chord length near far-field and finally 10times near outlet. It doesn't matter for the creation of domain know. It depends on me only knw that what i exactly needed for my output. So as per requirement it varies knw? Pls make me correct if am wrong!
|
|
March 11, 2014, 07:44 |
|
#4 |
Senior Member
|
Dear colleague, Indead I have not read about your idea specifically. I locate the solid in the middle of the domain, considering the above criterias!!
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Default domain | jaho | CFX | 5 | February 16, 2014 00:00 |
Question about creating porous domain interface for CFX by ICEM | lnk | CFX | 2 | July 21, 2012 06:48 |
[ICEM] Question about creating porous domain interface for CFX by ICEM | lnk | ANSYS Meshing & Geometry | 0 | July 20, 2012 06:40 |
Material identification between a flow domain and a porous domain | Ervideiro | CFX | 1 | June 1, 2010 09:50 |
Import a rectangular domain into CFX 5.7 from ICEM | SKLam | CFX | 9 | March 8, 2006 00:47 |