CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[DesignModeler] simply model, empty box

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   March 28, 2014, 19:26
Default simply model, empty box
New Member
dino sama
Join Date: Mar 2013
Posts: 2
Rep Power: 0
conquer is on a distinguished road
Hello everybody, I have simply problem..I need to create a empty box with thickness of walls 30 mm, Box have dimensions 0,5 m x 0,5 m x 0,5 m. I do this steps:
1. I create box, with earlier dimensions
2. with tool Thin/surface I set thickness of walls 30 mm
3. then I hide surfaces on side for next step
4. and then with tool "fill" I select interior surfaces of box to fill that volume inside box
, and I have now solid (box), and fluid inside box

Problem is in meshing, because there is no contact between meshes of fluid region and solid part. I do some on changing meshing method and similar, but helpless. I need this model for thermal analysis. I will be very appreciative for any suggestion. and sorry for poor english

King regards
conquer is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Superlinear speedup in OpenFOAM 13 msrinath80 OpenFOAM Running, Solving & CFD 18 March 3, 2015 06:36
Error finding variable "THERMX" sunilpatil CFX 8 April 26, 2013 08:00
how to model glass wool containing in a box kumar Siemens 0 September 29, 2008 13:06
New turbulence model - CEL or Junction Box? flga CFX 3 October 31, 2006 04:04
Immersol Simulation of a Heated Box Dong Phoenics 0 March 2, 2006 22:20

All times are GMT -4. The time now is 04:49.